Rockville RXM-S30 2400w 4-Channel Amplifier Amp w/ PA Mic For RZR/ATV/UTV/Cart

Description: The RXM-S30 is a marine amplifier that is perfect for many applications. This amplifier is water resistant so you can use it in a car or boat or any other application! The micro size of the amplifier also allows for installation in tight spots. The RSM-S30 is a 4 channel amplifier with 2,400 Watts peak output, 400 Watts CEA-2006 rated RMS power (4 x 90 @ 4 Ohms). You can also bridge the amplifier and get 2 x 600 Watts RMS @ 4 Ohms. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the CEA rated RMS rating can be used to compare with brands who rate their items using the CEA standard such as Kicker, Rockford, Alpine, etc. We put our newest technology into this amp! It is a class A/B full range micro amplifier and runs very efficiently. Full size class A/B generally run at about 50% efficiency depending on the quality of the particular amp. This one is able to run at around 70% efficiency due to the high quality of the parts we use to build these. What 70% efficiency means is that the amplifier will draw less current from the battery and will play louder! The PCB layout of this amplifier is really clean. The fuse rating is 60A (2 x 30A fuses). If you multiply this number by about 10 you can get a good estimate of the true RMS power output. This amplifier is also more efficient than others on the market, so it will put out more power than most amplifiers that have the same fuse rating. Features: Rockville RXM-S30 2400 Watt 4 Channel Proton Micro Marine Car Amplifier CEA Compliant Power Ratings: 400 Watts (4 x 90 Watts) at 4 ohms and 1% THD+N 600 Watts (4 x 150 Watts) at 2 ohms < 1% THD 600 Watts (2 x 300 Watts) bridged @ 4 Ohms < 1% THD RMS Power Ratings: 800 Watts (4 x 200 Watts RMS) @ 4 ohms 1200 Watts (4 x 300 Watts RMS) @ 2 ohms 1200 Watts (2 x 600 Watts RMS) @ 4 ohm Bridged Peak Power:2400 Watts (2 x 1200 @ 2 ohms or 1 x 2400 @ 4 Ohms) Marine amplifier with conformal coated PCB board High-Speed MOSFET Power Supply Studio-Grade Bipolar Output Stage Transistors Double Sided Surface Mount (SMD) PCB Design Selectable +6dB/+12dB Bass Equalizer @ 45hz Channel Separation:50 dB Current drawn @ MAX RMS output:27A @ 4ohm, 40A @ 2ohm Efficiency @ MAX RMS output:65% @ 4ohm, 60% @ 2ohm 2-Ohm Stable Stereo 4-Ohm Mono Bridgeable 3 Channel Mixed-Mono Capable Input sensitivity:20mV-6V Mute and Delay Soft Start System Full IC-Controlled Protection Circuitry 2 CH / 4 CH Input Mode Switch RCA Preamp Line Output 8 Volt Preamp Circuitry Status Mode LED Indicator 4 Gauge Lucite Encapsulated Power/Ground Terminal 12 Gauge Lucite Encapsulated Speaker Terminals THD+A: 0.01% Frequency Response:15Hz - 20KHz Continuously Fully Adjustable 12dB / Octave Crossover with Differential Circuitry Continuously Fully Adjustable High Pass Crossover: 50HZ – 250HZ CH1 & CH2 High Pass 50Hz - 250Hz CH3 & CH4 Low Pass 50Hz - 250Hz CH3 & CH4 High Pass 50Hz - 250Hz

Features: Rockville RXM-S30 2400 Watt 4 Channel Proton Micro Marine Car Amplifier. CEA Compliant Power Ratings: 400 Watts (4 x 90 Watts) at 4 ohms and 1% THD+N. 600 Watts (4 x 150 Watts) at 2 ohms < 1% THD. 600 Watts (2 x 300 Watts) bridged @ 4 Ohms < 1% THD. RMS Power Ratings: 800 Watts (4 x 200 Watts RMS) @ 4 ohms. 1200 Watts (4 x 300 Watts RMS) @ 2 ohms 1200 Watts (2 x 600 Watts RMS) @ 4 ohm Bridged. Peak Power: 2400 Watts (2 x 1200 @ 2 ohms or 1 x 2400 @ 4 Ohms). Marine amplifier with conformal coated PCB board. High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Double Sided Surface Mount (SMD) PCB Design. Selectable +6dB/+12dB Bass Equalizer @ 45hz. Channel Separation: 50 dB Current drawn @ MAX RMS output: 27A @ 4ohm, 40A @ 2ohm. Efficiency @ MAX RMS output: 65% @ 4ohm, 60% @ 2ohm. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable. Input sensitivity: 20mV-6V. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. 2 CH / 4 CH Input Mode Switch. RCA Preamp Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator 4 Gauge Lucite Encapsulated Power/Ground Terminals. 12 Gauge Lucite Encapsulated Speaker Terminals. THD+A: 0.01%. Frequency Response: 15Hz - 20KHz. Continuously Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Continuously Fully Adjustable High Pass Crossover: 50HZ 250HZ. CH1 & CH2 High Pass 50Hz - 250Hz. CH3 & CH4 Low Pass 50Hz - 250Hz. CH3 & CH4 High Pass 50Hz - 250Hz Full Adjustable Crossover Controls: low pass, high pass, and full pass. Sensitivity: 100dB @ 1w / 1m. S/N Ratio: >90dB. Damping Factor: > 200 @ 100Hz. 2 x 30A Fuses. 7 LBS. Dimensions: (W x H x L) 6.7" x 1.98" x 12.28"