(2) Peavey PVXP12DSP 12" Powered Active DJ/PA Speakers w DSP and 128dB SPL!

Video of PVXP12DSP: EQ Modes: The EQ modes are used to shape the tone of the sound coming out of the speaker. The selections are as follows: -Music: Tuned for general music use -EDM: Used to enhance electronic dance music -DJ KS 1: Standalone use (no Subwoofer), Indoors -DJ KS 2: Used with Subwoofer, Indoors -DJ KS 3: Used with Subwoofer, Outdoors -DJ KS 3: Used with Subwoofer, Outdoors -Rock, Country, Hip-Hop: Optimizes the speaker for these typical genres -Acoustic: Used to enhance acoustic performances -Voice: Gently rolls off the extreme highs and lows to enhance spoken word -Church: Tuned for the typical church environment -Monitor: Optimizes the speaker’s frequency response while being used as a floor monitor P. Save (Power Save): The power save settings are “on” and “off”. In the “off” position, the LCD is illuminated at all times. In the “on” position, the LCD is illuminated until the user stops using the controls. The LCD backlight will turn off about 1 minute after the last on screen change. To turn the backlight back on, simply rotate the “Push-to-Select” knob. Bright: Various conditions (like bright sun) or even the position of the speaker can sometimes make the LCD difficult to see or read. Two adjustments have been included to improve the visibility of the LCD. The first is a brightness adjustment. It varies the brightness of the illuminated characters on the screen. Turning the adjustment clockwise makes it brighter, while turning it counterclockwise makes the characters dimmer. Locate: Used to optimize the speakers response based on its location. The selections are Pole, Floor and Wall. Contr (Contrast): The second adjustment is the contrast. The contrast adjustment can be used to improve the viewing angle of the LCD. This may need to be adjusted if the speaker is overhead (like on a pole) or on the floor. You may have to try some experimenting with this control to improve the visibility of the LCD. Features: Peavey PVXP12DSP 12" Powered Active DJ/PA Speaker w DSP and 128dB SPL! Two-way bi-amplified analog amp powered speaker system Heavy-duty woofer with a 2-3/8" voice coil & 50 oz magnet RX 14 compression driver, with 1.4" titanium diaphragm Multiple Fly Points, Ready for Install Applications Exclusive Quadratic Throat Waveguide Technology - Asymmetrical Quadratic Throat Waveguide horn aims its coverage 15 degrees upward and 35 degrees downward- directing sound to the audience, not over their heads. A.D.S.P. - Advanced Digital Signal Processing Fan cooled for maximum reliability Patented Quadratic Throat Waveguide technology, 100 by 50° coverage Asymmetrical horn aims the sound down at the audience, not over their heads Input is via a combo female XLR and 1/4" TRS phone jack with balanced input A Mic/Line switch provides for two different gain settings Thru output is via a male XLR jack and 1/4" TRS phone jack Multiple Factory Preset EQ settings Rugged plastic injection-molded trapezoidal enclosure Full-coverage perforated steel grille, w

Video of PVXP12DSP: EQ Modes: The EQ modes are used to shape the tone of the sound coming out of thespeaker. The selections are as follows: -Music: Tuned for general music use -EDM: Used to enhance electronic dance music -DJ KS 1: Standalone use (no Subwoofer), Indoors -DJ KS 2: Used with Subwoofer, Indoors -DJ KS 3: Used with Subwoofer, Outdoors -DJ KS 3: Used with Subwoofer, Outdoors -Rock, Country, Hip-Hop: Optimizes the speaker for these typical genres -Acoustic: Used to enhance acoustic performances -Voice: Gently rolls off the extreme highs and lows to enhance spoken word -Church: Tuned for the typical church environment -Monitor: Optimizes the speaker’s frequency response while being used as a floormonitor P. Save (Power Save): The power save settings are “on” and “off”. In the “off”position, the LCD is illuminated at all times. In the “on” position, the LCD isilluminated until the user stops using the controls. The LCD backlight will turnoff about 1 minute after the last on screen change. To turn the backlight backon, simply rotate the “Push-to-Select” knob. Bright: Various conditions (like bright sun) or even the position of the speakercan sometimes make the LCD difficult to see or read. Two adjustments have beenincluded to improve the visibility of the LCD. The first is a brightnessadjustment. It varies the brightness of the illuminated characters on thescreen. Turning the adjustment clockwise makes it brighter, while turning itcounterclockwise makes the characters dimmer. Locate: Used to optimize the speakers response based on its location. Theselections are Pole, Floor and Wall. Contr (Contrast): The second adjustment is the contrast. The contrast adjustmentcan be used to improve the viewing angle of the LCD. This may need to beadjusted if the speaker is overhead (like on a pole) or on the floor. You mayhave to try some experimenting with this control to improve the visibility ofthe LCD. Features: Peavey PVXP12DSP 12" Powered Active DJ/PA Speaker w DSP and 128dB SPL! Two-way bi-amplified analog amp powered speaker system Heavy-duty woofer with a 2-3/8" voice coil & 50 oz magnet RX 14 compression driver, with 1.4" titanium diaphragm Multiple Fly Points, Ready for Install Applications Exclusive Quadratic Throat Waveguide Technology - Asymmetrical Quadratic ThroatWaveguide horn aims its coverage 15 degrees upward and 35 degrees downward-directing sound to the audience, not over their heads. A.D.S.P. - Advanced Digital Signal Processing Fan cooled for maximum reliability Patented Quadratic Throat Waveguide technology, 100 by 50° coverage Asymmetrical horn aims the sound down at the audience, not over their heads Input is via a combo female XLR and 1/4" TRS phone jack with balanced input A Mic/Line switch provides for two different gain settings Thru output is via a male XLR jack and 1/4" TRS phone jack Multiple Factory Preset EQ settings Rugged plastic injection-molded trapezoidal enclosure Full-coverage perforated steel grille, with powder coat finish Pole mount molded-in for 1 3/8" diameter poles Top, bottom and right side flying point inserts Dimensions (HxWxD): 24.5" x 16.1" x 15" (622.3mm x 409mm x 381mm) Weight: 43lbs (19.5kg)