日本
just now
[Efficient Performance] The Starter Kit will produce an average of 2kWh of electricity per day (Based on 5 hours of direct sunlight condition). The Cell Efficiency can reach 22%. The bypass diode can ensure the panel has an excellent performance in a low-light environment and the TPT back sheet dissipates excess heat to ensure smooth output performance. [Solid Quality] Advanced encapsulation material with multi-layered sheet laminations protects cells from physical damage or distortion, improving cell performance and providing a long service life. [Smart Function] The Wanderer PWM Charge Controller is compatible with four different types of batteries: sealed, Gel, Flooded, and Lithium batteries. It also features advanced 4-stage charging (bulk, boost, float, and equalization) to ensure your battery is efficiently and safely charged to 100%. [Full System Protection] The Wanderer PWM Charge Controller has built-in protection to safeguard your systems, such as reverse polarity protection, battery overcharging protection, overload protection, and short circuit protection. [Ready to Install] This Renogy Solar Kit includes the equipment necessary for building a new system. The necessary cables, Z-brackets, Solar Y Branch Connectors and pre-drilled holes on the back frame of the panel allow fast and secure mounting. Specifications: Renogy 100W Monocrystalline Solar Panel Max Power at STC: 100W Open Circuit Voltage (VOC): 24.3V Short Circuit Current (ISC): 5.21A Optimum Operating Voltage (VMP): 20.4V Optimum Operating Current (IMP): 4.91A Operating Temperature: -40°F to 185°F(-40℃ to +85℃) Dimensions: 41.8*20.9*1.38in Weight: 14.1 lb Wanderer Li 30A PWM Charge Controller Nominal Voltage: 12V Rated Charging Current: 30A Max. PV Input Voltage: 25 VDC Max Gauge Size: Up to 8AWG Max. PV Input Power: 400W at 12V RENOGY 8FT 10AWG TRAY CABLES (PAIR) Size: 10AWG 8ft Rating Voltage: 600/1000V Operating Temperature: -40°F to +185°F Renogy 20ft 10AWG Solar Adaptor Kit (SET) Size: 10AWG 20ft Rating Voltage: 600/1000V Operating Temperature: -40°F to +185°F Package Includes: RENOGY 100W MONOCRYSTALLINE SOLAR PANEL Wanderer Li 30A PWM Charge Controller RENOGY 8FT 10AWG TRAY CABLES (PAIR) Renogy 20ft 10AWG Solar Adaptor Kit (SET) RENOGY SOLAR Y BRANCH CONNECTORS MOUNTING Z BRACKETS (SET) CONTENT 1. Eight Long Cap Bolts and Four Short Bolts 2. Four Spring Washers and Four Washers 3. Four Z Shape Solar Panel Brackets 4. Four Nuts Warranty Panels 25-year power output warranty: 5 year 95% output warranty 10 year 90% output warranty 25 year 80% output warranty Accessories 1-year material and workmanship warranty
Amazon
walmart
| Manufacturer | - |
|---|---|
| Brand | Renogy |
| Item model number | 0081636002054 |
| Color | Black |
| Weight | - |
| Height | - |
| Depth | - |
| Product Id | 2099904 |
|---|---|
| User Reviews and Ratings | 3 (1 ratings) 3 out of 5 stars |
| UPC | 816360020547 |
| # | Title | Reviews | User Ratings | Price |
|---|---|---|---|---|
| 1 |
Search on Amazon
Price:
Search
on
|
Search
on
|
||
| 2 |
Renogy 400W 12V Solar Panel Monocrystalline off Grid Starter Kit with 30A Wanderer Charger Controller
Price:
$519
on
|
(4.6) |
$519
on
|
hello. here's what's happening. since my plan was to expand, the pwm is fine because i'll be running 2 systems eventually. when can afford, gonna get a 40amp mppt later along w/2 more panels to run 2x3 in series/6 total panels. then 1 or 2 panels more to use the pwm separately later. which will obviously need more batteries. unless i switch from the (eventual) 600w to the 100-200w using the same bank. so, in closing my thesis, as far as the 30amp pwm? very use/such handy. thanks. doge
Everything is good . I do need a hard copy of my receipt for tax purposes.
The only problem is that a week later the price went up, so I didn't buy another one as I hoped to.
I bought this beginning last summer. Took about a day to install with two power inverters. Worked very well. Only issue was fuse blown between panels and controller. It was able too keep my AGM batteries charged with no problem, but I'm upping my system to lithium batteries this next summer. I would buy ships system again.
I bought this kit a year ago, to run lights and small power tools in my shed. While all was good, i quickly upgraded to a much larger charge controller to run 800watts in total and run a larger battery back. I will be adding 6 more panels to my shed for a total of 1400watts, and plan on using this charge controller in parallel with my Morning Star. Overall great buy would recommend.
What's to be said? It works as advertised. Actually, it works like a charm, and it's easy to set up.
Very nice kit. A wiring diagram would of been nice but I can just look it up on the internet.. A inline fuse would of been nice to add to the kit, and it taking a extra 2 weeks to get one shipped it was a little hassle.
The panels are quality and function as they should. I'm pleased with the transaction. The couple things that bothered me, my fault, the Wanderer controller is the bottom of the line. Spend the few extra bucks and upgrade to the MPPT controller which not only performs better it has display stats. Then you dont waste money buying a seperate voltage display monitor like me. The only thing I dont like about the kit is the "Y" connectors. Instead of having an 8 panel or even a 4 panel junction block you have these individual "Y" connectors that plug into each other. When you connect them all together you have a glob of a 10 inch triangle to deal with. Not only an eyesore you have to figure out how to secure them to your roof. I ended up hog tying them with cable ties to a rack I had on the roof. There is a better solution with a junction block.
The only improvements that could be made are: 1) The cables on the panels could be longer. I wanted to install the panels in 1 row next to each other with the cables run to the center. Due to the shortness of the cables the only way to mount them, without buying additional cables, is in a 2x2 grid with the cables in the center. 2) Which cable is Positive and Negative could be marked better. The marking is a small easily overlooked + or - molded into the plugs. 3) Include a copy of the wiring diagram. Its available on the website but a hard copy would be nice.
Shipped on time, but anable to register warranty on line, called Renogy got their call center which was very chaotic, you could hear all their agents talking in the background. Agent was unable to complete warranty registration on line, said she would do a paper registration and send me an email, which i haven't received. Had to ask for a name and case number. Still no warranty registration. Can Walmart contact Renogy for warranty?