52CC 2-Stroke Post Hole Digger Gas Powered Auger Borer Fence Ground Drill+3 Bits

52CC 2-Stroke Post Hole Digger Gas Powered Auger Borer Fence Ground Drill+3 Bits Description The attached manual is a general version of a variety of products, so the accessories and parameters introduced will be slightly different. The product you received is complete and correct. If you have any questions about installation/operation, please contact the seller for assistance. Description: Do you want to grow some plants in your garden but feel tired of digging holes with your hands? This excavator may be what you exactly need! You can manage your garden or farmland with it at ease. It has a large power capacity and drill bits of three sizes that are easily removed and installed. Easy to carry, easy to operate! Plus, it is also an ideal tool for digging holes for other purposes, such as on ice for fishing. Details: 52cc Engine: It is equipped with a 52cc gas motor that can be operated by one or two people for multiple tasks. Ergonomically designed double handles Easy to Operate Three Digging Bits: 4 inch & 6 inch & 8 inch Throttle Switch: The machine has the latest hand-held throttle total range, making the operation more convenient and comfortable. Sturdy and Durable: Different from the side-mounted engine model, this excavator has a straight-through gearbox that makes the gears less likely to be sheared off. Specificationsï¼ Horsepower: 2.4ps Engine: Single Cylinder, 2-stroke, air-cooled Fuel mix: 25/1 Output Shaft Diameter: 20mm Drill Bits: 4", 6" and 8" Bit length: 80cm/31" Cylinder Capacity: 52cc Power: 1.9kw/7500rpm Size:50x30x30cm Weight: 10.35kg. (without bit) Package Includedï¼ 1x Digging machine 3x Drill Bits: 4", 6" and 8" 1x 12" Extension Bar 1x Fuel Mixing Bottle 1x Funnel 1x Starting Handle Tool Kit for Assembly Notes: You should fill the fuel tank with mixed oil (gasoline: two-stroke engine oil=25:1). Remember to add butter to the gearbox. Pull the starter quickly when starting, don't stop midway when pulling. Start the machine before the throttle switch opens. Press the oil bubble a few times before starting. If the oil pipe has oil in and out, it suggests that the oil has been supplied. When cold starting the machine, close the damper first, then reopen it, so that you can run it normally. assistance.

52CC 2-Stroke Post Hole Digger Gas Powered Auger Borer Fence Ground Drill+3 Bits