Loyalheartdy Thermal Binding Machine 1-50MM Binding Thickness Paper Universal Infrared Light Detecting Hot Melt Machine 110V

This thermal binding machine is made of a quality ABS plate and full metal handle, which is sturdy and durable for long-term use. With three adjustment positions and the ability to bind paper up to 1.97inch thick, it can meet your multiple binding needs. It can be used to bind paper and documents such as advanced bidding documents, insurance policies, contracts, reports, quotations, real estate certificates, visa documents, financial vouchers, accounting books, etc. Specification: Material: ABS + Metal Voltage: 110v Power: 100w Working Temperature: 150 0C (±10%) Preheating Time: 3 Min Binding Time: 1 / 2 / 3 Min Binding Format: 320*50mm/12.6*1.97inch (A3 Short Side, A4, A5, A6) Binding Slot: Yes Binding Tips: Yes Cooling Slot: Yes Cooling Method: Natural Cooling Cooling Time: 3-5 Min Blending Method: Hot Melt Envelope Binding, Hot Melt Tape Binding, Printing Cover with Hot Melt Tape Binding Applicable Supplies: Hot Melt Envelope, Printing Cover, Hot Melt Adhesive Strip Binding Thickness: 0.1-5cm/0.039-1.97in Maximum Binding Length: 32cm/12.6in Package Size: 42*11.7*30cm/16.54*4.61*11.81in Product Size: 38*23.5*20cm/15*9.3*7.9in Gross Weight: 2.5kg/5.51lbs Net Weight: 2.2kg/4.85lbs How to use: 1.Power on the machine, then the heating indicator light is on 2.The working indicator light is on after the preheating is completed 3.Put the document into the envelope 4.Put the text into the heating slot and make full contact with the heating plate 5.Organize the documents and put them into the cooling tank for 3-5 minutes 6.Binding is completed How to adjust the bindery gear: 1.Press the green button in the middle of the operation panel, and the gear will be adjusted to II gear. The indicator lights up 2.Press the green button in the middle of the operation panel again, and the gear will be adjusted to I and II gear Package Included: 1 x Thermal Binding Machine 1 x English Manual Note: 1.You need to wait until the RUN light on the machine operation panel is lit before you can make the gear adjustment. Remove the bound documents before making adjustments 2.1 position is suitable for binding documents of 0.39-1.18inch. 2 positions are suitable for binding documents of 1.18-2inch. 3 positions are designed for voucher binding. The gear adjustment is used to speed up the binding time. The higher the gear, the higher the stability of the join and the faster the binding time will be 3.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement 4.If you have any problems, please feel free to contact us

✔️It has 1, 2, and 3-speed modes, you can adjust it according to the paper thickness ✔️It uses PTC ceramic, the preferred heating element for automotive air conditioners, improving heating speed and efficiency ✔️It adopts a CPU control system to ensure precise control and infrared photoelectric detection, which can ensure accurate binding and is not easy to misplace ✔️Ceramic heating makes it possible to preheat in a short time (1/2/3minutes) and save time. In addition, it comes with an automatic clamping function ✔️You can choose hot melt envelope binding, hot melt tape binding, or printing cover with hot melt tape binding according to the type of binding paper and your preference ✔️Designed with an anti-scald handle as well as an open cooling tank, it can discharge the heat generated by the machine in time and also prevent your hands from being burned ✔️The switch is set on the front of the machine instead of the flat surface, this can prevent your hand from touching the flat surface to be burned when you close/open it, which is very user-friendly ✔️The bottom of the machine has rubber anti-slip pads, which effectively reduce the vibration generated by the machine during operation and improve the accuracy of the binding