(2) JBL CBT 1000 1500 Watt Black Wall Mount Line Array Column Speakers+Extension

Package Includes: (2) JBL CBT 1000 1500w 2-Way Swivel Wall Mount Line Array Column Speaker in Black (2) JBL CBT 1000E 1500w Extension for CBT 1000 Line Array Column Speaker in Black Features of CBT 1000: Asymmetrical vertical coverage sends more sound toward far area of room to make front-to-back sound levels more consistent. Components: Twenty-four (24) 25 mm (1 in) extra-high-power soft dome tweeters and six (6) 165 mm (6-1/2”) high-excursion LF drivers arranged coaxially. Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out of coverage lobing. Vertical pattern coverage is individually adjustable through a range of four (4) “Pattern Up” angles and four (4) “Pattern Down” coverage angles for a total of sixteen (16) different coverage combinations, all without the use of external DSP processing. Patent-pending Tapered Horizontal Waveguide provides a continuously varying horizontal dispersion (very wide for short-throw, narrower for long-throw) delivering superior coverage in both the front and rear corners of a room. Single-speaker room coverage at high SPL, with little over-splash and strong bass response down to below 40 Hz. Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode. Swivel (pan)/tilt wall bracket included. Specifications: Drivers: Six (6) 165 mm (6.5 in) LF drivers Twenty-four (24) 25 mm (1 in) HF drivers Frequency Range (-10dB): 45 Hz – 20 kHz Sensitivity: 102 dB (at highest sensitivity setting: “Point” pattern up, “Point” pattern down, “Speech” voicing, in free space); 95 dB (at lowest sensitivity setting: “Medium” pattern up,“Downfill” pattern down, “Music” voicing in free space) Impedance: 4 ohms (4 ohms above 1 kHz; 8 ohms below 800 Hz) Power Rating: 1500 W (6000 W peak), 2 hrs; 1000 W (4000 W peak), 100 hrs Maximum Input Voltage: 65.0 Volts RMS (2 hrs), 130.0 Volts Peak Maximum SPL (1m): Highest directivity setting: (“Point” pattern up, “Point” pattern down) with “Speech” voicing: 131 dB continuous average pink noise, 134 dB continuous program, 137 dB Peak Vertical Coverage Settings: Coverage is effective (frequency response similar) beyond the traditional -6 dB coverage angles. This is especially useful in compensating for differences in listening distances. Figures show both the -6 dB and -12 dB coverage angles (at 3 kHz). Angles are in reference to cabinet aiming axis. Pattern UP Settings: “Point”: -6dB @ +7°, -12 dB @ +12° “Tight”: -6dB @ +9°, -12 dB @ +15° “Narrow”: -6dB @ +10°, -12 dB @ +20° “Medium”: -6dB @ +13°, -12 dB @ +24° Pattern DOWN Settings: “Point”: -6dB @ -7°, -12 dB @ -12° “Narrow”: -6dB @ -10°, -12 dB @ -20° “Broad”: -6dB @ -17°, -12 dB @ -28° “Downfill”: -6dB @ -20°, -12 dB @ -35° Horizontal Coverage: -pending Tapered Horizontal Waveguide continuously variable. Long-throw (top) section: 100° Middle section: 130° Short-throw (bottom) section: 160° Recommended High-Pass: 35Hz, 24 dB/oct or greater Low Frequency Drivers: 6 pcs, 165 mm (6.5 in) drivers, lightweight neodymium motors, 50 mm (2.0 in) diameter voice coils, copper-capped pole tips to minimize flux modulation and linearize inductance, 16 mm (0.63 in) long coil for high linear drive and high power handling, damped blended textile surround, coated cones for moisture, UV and salt resistance. Magnetically shielded. Features of CBT 1000E: Six 6.5" high-excursion LF drivers 1500W RMS power handling Built-in purpose-design

(2) JBL CBT 1000 1500 Watt Black Wall Mount Line Array Column Speakers+Extension