Kenwood eXcelon XR600-6DSP w/ ADS MAR & HRNARCH4 Package

The XR600-6DSP amplifier works with the iDatalink amplifier replacement module and seamlessly replaces the factory amplifier found in premium sounds systems in most Ford, Chrysler, Jeep and Ram vehicles. This solution retains all the factory chimes, Bluetooth functions, navigation prompts and safety sensors, while providing a major upgrade in sound quality. The amplifier connects using vehicle specific T- harnesses, making the installation clean and simple. The amplifier settings are then accessed via a smartphone App using Bluetooth. The tuning App is easy to use and allows for detailed tuning. Once the system is set up, a switch on the amp locks the settings and only allows the App to access simple adjustments, making it safe for the customer to use. iDatalink compatibility Max Power : 1200W RMS Power : 75W x 6 (4Ω) 100W x 6 (2Ω) (W)12-5/8" x (H)2" x (D)6-5/8" Built-in DSP Setting by Remote App 6ch Output 13Band Graphic Equalizer 3Band Parametric Equalizer Digital Time Alignmnet Digital X'over 6 Channels of Amplification 75 x 6 RMS @ 4ohms 100 x @ 2ohms 192kHz 32 bit- 10 Channel DSP (6 channels amplified -4 channels of Pre-out) 13 Band EQ for each Channel Advanced Crossovers Full/ Low pass/ Band Pass/ High Pass. Linkwitz-Riley @ -12/24 dB Butterworth @ -6/12/18/24 dB Digital Time Alignment 10 Channels 0~20.01’, .4 inch Steps 3 Band Parametric EQ 1/6 Octave Steps Cooling Fan Small Size 12 5/8” x 2” x 6 5/8” High Quality Circuitry for best Possible Sound LC filter- Surface Mount film Capacitor and Closed magnetic coil Noise Eliminating Amplifier Design Maestro ADSMAR Universal amplifier replacement interface for select Chrysler and Ford vehicles. Enables the seamless integration of a compatible aftermarket amplifier while retaining the vehicle's factory radio. Compatible with select Kenwood and Audison amplifiers sold separately. Seamless integration with compatible amplifiers Retain factory radio and infotainment systems T-harness installation (T harness sold separately) iDataLink HRN-AR-CH4 Connects a Maestro AR amplifier replacement module to select 2015-up Chrysler-built vehicles replace your factory amplifier with an iDatalink-ready amp or processor Maestro AR amplifier replacement module required retain fader control, tone, and other important features and functions Amplifier replacement T-harness for select Chrysler, Dodge, Jeep, Maserati and Ram vehicles 2016 and up. Greatly simplifies the installation of the Maestro AR module sold separately.

Kenwood eXcelon XR600-6DSP w/ ADS MAR & HRNARCH4 Package