(6) JBL CONTROL 88M 8" Commercial Outdoor Inground/On ground Landscape Speakers

Package Includes: (6) JBL CONTROL 88M 8" Commercial 70v Outdoor Inground/On ground Landscape Speaker Features: Components: 8” highly weather-resistant driver 1” soft-dome highly weather-resistant tweeter 120W Pink Noise Power Handling (240W program) in direct 8Ώ setting, plus built-in 60W 70V/100V multi-tap transformer Tough polyethylene highly weather resistant enclosure Fully isolated center chamber for wiring protection High fidelity sound character with broad frequency range of 47Hz - 16kHz Specifications: Frequency Range (-10dB): 47 Hz – 16 kHz Power Rating: 240 W Continuous Program (2 hrs) 120W (480W peak), Continuous Pink Noise (2 hrs) 100W (400W peak) Continuous Pink Noise (100 hrs) Transformer Taps: 70V: 60W, 30W, 15W & 7.5W 100V: 60W, 30W, 15W Frequency Response (±3 dB): 60Hz - 15 kHz Maximum Input Voltage: 28.0 V Sensitivity: 87 dB, 1W @ 1m (ave. 80Hz - 16kHz) Coverage Angle: 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground). Directivity Factor (Q): 2.1 Directivity Index (DI): 3.2 dB Maximum SPL (1m): 108 dB Impedance: 8Ω (at 8Ω setting) Minimum Impedance: 6.6Ω at 9.5kHz Insertion Loss: <0.5 dB at any tap setting Thru Setting: 8Ω nominal Crossover Type: 2nd Order LPF on LF and 2nd Order HPF on HF Recommended Protective High-Pass: 45 Hz for 8Ω operation, 24 dB/oct 80 Hz for 60W tap, 24 dB/oct 50 Hz for 30W, 7.5W, and 7.5W taps, 24 dB/oct Drivers: LF: 200 mm (8.00 in) diameter LF driver, Kapton™ former, 38mm (1.5 in) voice coil, polypropylene cone and polyurethane surround. HF: 25mm (1.0 in) diameter HF driver Polyetherimide (PEI) dome. Enclosure: LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated. Grille: Powder coated stainless steel. Outdoor Capability: IP-56 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated. Safety Agency: UL1480, Transformer UL Recognized per UL1876, ROHS compliant. Input Connectors: Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section) Wiring: Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For Installation instructions, see Installation Guide (#IS-C80MLS). Colors: Hunter Green, RAL6018 Dimensions (H x W x D): 524 x 355 x 355 mm (20.7 x 14 x 14 in.) Net Weight (each): 7.8 kg (17 lb) Shipping Weight: 10.5 kg (23 lb) Included Accessories: (2) wire nuts, (2) gland nuts, (1) right-angle screwdriver Installer-Supplied Required Tools: 22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure. Optional Accessories: 22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.

(6) JBL CONTROL 88M 8" Commercial Outdoor Inground/On ground Landscape Speakers