(4) JBL 3" 15w 70v In-Ceiling Speakers+JBL Amplifier For Restaurant/Bar/Cafe

Package Includes: (1) JBL VMA160 60-Watt 70 Volt 70V Mixer/Amplifier with Bluetooth 5 Channel Inputs (2) Pair of JBL CONTROL 12C/T 3" 15w 70v In-Ceiling Speakers For Restaurant/Bar/Cafe Description: The JBL VMA Series is a cost-effective line of Mixer/Amplifiers with low impedance functionality (4O, 8O) and high impedance 70V and 100V output. They are designed with convenient and flexible features to be used by commercial integrators worldwide, ideal for emerging markets. Features: JBL VMA160 60 Watt 70V Mixer/Amplifier with Bluetooth and 5 Channel Inputs Max Output Power: 60 Watts Frequency Response: 20 Hz - 20 kHz THD (Total Harmonic Distortion): <0.5% Signal-to-Noise Ratio: > 76 dB Input Impedance: Mic: 400 Ohms Line: 20 kOhms (balanced) RCA: 50 kOhms Phantom Power: 27VDC Crosstalk: -70 dB Nominal AC Line Voltages: 100V, 120V, 220V, 220-240V, 50/60 Hz Minimum Load Impedance: 4 Ohms, 80 Ohms,160 Ohms Insertion Loss: 1 dB Maximum Number of Inputs: 5 Number of Outputs: 1 Tone Control: Bass +/-14dB @ 50Hz; Treble +/-14dB @10kHz Input Sensitivity: Mic Input: 5.5mVRMS Line Input: 1.3VRMS RCA Input (stereo in): 130mVRMS Independent bass and treble controls for each output channel Paging Chime, and Priority Muting Rack mounting hardware included Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches Product Weight: 19.4 Lbs. Features: Pair JBL CONTROL 12C/T 3" 15w 70v In-Ceiling Speakers For Restaurant/Bar/Cafe 76 mm (3 in) full-range driver Blind-mount backcan for quick and easy install Combined 70V/100V and low impedance direct operation: 20 Watts at 8O nominal setting and 15W multi-tap at 70V/100V 68 Hz – 17 kHz bandwidth with wide 130° coverage Color: White Specifications: Frequency Range (-10 dB) 68 Hz – 17 kHz Power Capacity (at low-Z) 40 Watts Continuous Program Power 20 Watts Continuous Pink Noise Transformer Taps 15 W, 7.5 W, 3.8 W @ 70V and 100V (& 1.9 W @ 70V only) Frequency Response (±3 dB) 95 Hz – 15 kHz Nominal Sensitivity 84 dB Nominal Coverage Angle 130° conical coverage Directivity Factor (Q) 9.8 Directivity Index (DI) 7.4 dB Rated Maximum SPL 97 dB @ 1 m (3.3 ft) average, 103 dB peak Nominal Impedance 8 ohms (in direct/bypass 8O setting) Full-Range Driver 76 mm (3 inch) with polypropylene cone, butyl rubber surround, Kapton™ voice coil former, high temperature voice coil, aluminum coupling ring for low distortion and HF extension Input Connectors Removable locking 4-pin connector with screw-down terminals. Max wire size 12 AWG (2.5 mm2) Connector Wiring Pin 1 = + In; Pin 2 = - In; Pin 3 = + Loop Thru; Pin 4 = - Loop Thru Strain Reliefs Strain relief for two cables or two flex conduits via coupled clam

Package Includes: (1) JBL VMA160 60-Watt 70 Volt 70V Mixer/Amplifier with Bluetooth 5 Channel Inputs. (2) Pair of JBL CONTROL 12C/T 3" 15w 70v In-Ceiling Speakers For Restaurant/Bar/Cafe. Features: JBL VMA160 60 Watt 70V Mixer/Amplifier with Bluetooth and 5 Channel Inputs. Max Output Power: 60 Watts. Frequency Response: 20 Hz - 20 kHz. THD (Total Harmonic Distortion): <0.5%. Signal-to-Noise Ratio: > 76 dB. Input Impedance: Mic: 400 Ohms Line: 20 kOhms (balanced) RCA: 50 kOhms Phantom Power: 27VDC. Crosstalk: -70 dB. Nominal AC Line Voltages: 100V, 120V, 220V, 220-240V, 50/60 Hz. Minimum Load Impedance: 4 Ohms, 80 Ohms,160 Ohms. Insertion Loss: 1 dB Maximum. Number of Inputs: 5. Number of Outputs: 1. Tone Control: Bass +/-14dB @ 50Hz; Treble +/-14dB @10kHz. Input Sensitivity: Mic Input: 5.5mVRMS Line Input: 1.3VRMS RCA Input (stereo in): 130mVRMS. Independent bass and treble controls for each output channel. Paging Chime, and Priority Muting Rack mounting hardware included. Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches. Product Weight: 19.4 Lbs.. Pair JBL CONTROL 12C/T 3" 15w 70v In-Ceiling Speakers For Restaurant/Bar/Cafe. 76 mm (3 in) full-range driver. Blind-mount backcan for quick and easy install. Combined 70V/100V and low impedance direct operation: 20 Watts at 8? nominal setting and 15W multi-tap at 70V/100V. 68 Hz 17 kHz bandwidth with wide 130 coverage. Color: White. Frequency Range (-10 dB) 68 Hz 17 kHz Power Capacity (at low-Z) 40 Watts Continuous Program Power. 20 Watts Continuous Pink Noise. Transformer Taps 15 W, 7.5 W, 3.8 W @ 70V and 100V. (& 1.9 W @ 70V only). Frequency Response (3 dB) 95 Hz 15 kHz. Nominal Sensitivity 84 dB. Nominal Coverage Angle 130 conical coverage. Directivity Factor (Q) 9.8. Directivity Index (DI) 7.4 dB. Rated Maximum SPL 97 dB @ 1 m (3.3 ft) average, 103 dB peak. Nominal Impedance 8 ohms (in direct/bypass 8? setting) Full-Range Driver 76 mm (3 inch) with polypropylene cone, butyl rubber surround, Kapton voice coil former, high temperature voice coil, aluminum coupling ring for low distortion and HF extension. Input Connectors Removable locking 4-pin connector with screw-down terminals.. Max wire size 12 AWG (2.5 mm2). Connector Wiring Pin 1 = + In; Pin 2 = - In; Pin 3 = + Loop Thru; Pin 4 = - Loop Thru. Strain Reliefs Strain relief for two cables or two flex conduits via coupled clamping mechanism