Seachem PhosGuard Fish & Aquatic Life Filtration Media, 135.2 Oz

Seachem PhosGuard Fish & Aquatic Filtration MediaFor more than 30 years, aquarium hobbyists have turned to Seachem Laboratories for products designed by chemists and biologists. Quickly remove phosphate and silicate from marine and freshwater aquaria with Seachem PhosGuard. Highly porous for high capacity and bead shaped for optimum water flow, Seachem PhosGuard has an irreversible binding quality.May generate heat on initial contact with water. Pre-wet by adding to a double volume of freshwater, followed by a rinse. For best results, PhosGuard? should be rinsed before use and placed so as to maximize the flow of water through it but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Use of a filter bag is recommended. Use 85 mL (1/3 cup) for every 200 L (50 US gallons) saltwater or 400 L (100 US gallons) freshwater. Leave product in place for 4 days, then test phosphate or silicate concentrations with either MultiTest?: Phosphate or MultiTest?: Silicate. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosGuard?, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Over treating is not recommended. PhosGuard? is not an exchange resin and does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities.

Seachem PhosGuard Fish & Aquatic Life Filtration Media, 135.2 Oz