Bathrena Gas Powered Earth Auger Digger Fence Ground Drill Kit

Type1:71 cc Engine Technical Details: Engine: Single Cylinder, 2-stroke, air-cooled Cylinder capacity : 71cc Fuel mix: 25/1 Bit length : 31" Safety: Bit Lock Power：3.2kw Drill /bit：Without Carburetor with pump Easy starting system (cord starter). Centrifugal clutch Change bits quickly and easily Weight : 10.85 Kg. (without bit) Accessories: Fuel Mixing Bottle Toolkit for assembly Type2:52 cc Engine: Please keep the choke to on position when the machine is in use! Technical details: Engine: Single Cylinder, 2-stroke, air-cooled. Cylinder capacity : 52cc. Fuel mix: 25/1. Safety: Bit Lock. Power: 1.9KW/7500rpm Carburetor with pump. Easy starting system (cord starter). Centrifugal clutch. Change bits quickly and easily. Weight : 10.35 Kg. (without bit). Rotational Speed：8500RPM horsepower: 2.4 ps Accessories: 4'' 6'' 8'' Drill Bits only Accessories: Fuel Mixing Bottle. Toolkit for assembly. Type3:4'' 6'' 8'' Drill Bits only 3 bits: 4", 6" and 8". Extension Bar: 12". Supplied with bits of 4", 6" & 8", the auger can drill holes of various diameters. Type4:71 cc Engine + 4'' 6'' 8'' Drill Bits Type5: 52 cc Engine + 4'' 6'' 8'' Drill Bits Start steps: 1. Please remember to close the air door and then pull the starter (don’t forget this step, otherwise you will not be able to ignite when you dead lift) 2. Pull the rope starter 3-5 times, the total length of the rope is 70cm, and the safety distance is 30-50cm. If the safety distance is exceeded, the rope will be broken, not the longer the rope is, the better 3. After the start is successful, remember to open the damper (not to pull the starter when opening the damper. When the damper is opened, too much air enters and there is too little oxygen, it is difficult to start, so pull the starter when the damper is closed.After the machine starts successfully, open the damper. Pulling the starter to the end of 70cm will break the rope; the safety distance is 30-50cm, and pulling the rope hard will cause the rope to break. After breaking, you need to buy the starter again. Supplied with bits of 4", 6" & 8", the auger can drill holes of various diameters. likely to shear gears. Technical details: Engine: Single Cylinder, 2-stroke, air-cooled. Cylinder capacity : 52cc. Fuel mix: 25/1. Bits : 4", 6" and 8". Bit length: 31". Safety: Bit Lock. Power: 1.9KW/7500rpm Carburetor with pump. Easy starting system (cord starter). Centrifugal clutch. Change bits quickly and easily. Weight : 10.35 Kg. (without bit). horsepower: 2.4 ps Accessories: 3 bits: 4", 6" and 8". Extension Bar: 12". Fuel Mixing Bottle. Toolkit for assembly. Type6:(2.3HP)52 cc Engine + 3xDrill Bits Description: Supplied with bits of 4", 6" & 8", the auger can drill holes of various diameters. Engine: Single Cylinder, 2-stroke, air-cooled. Cylinder capacity : 52cc. Fuel mix: 25/1. Bits : 4", 6" and 8". Safety: Bit Lock. Power：1.7W/8500rpm Carburetor with pump. Easy starting system (cord starter). Centrifugal clutch. Change bits quickly and easily. Weight : 11.6 Kg. (without bit). Accessories: 3 bits: 4", 6" and 8". Extension Bar: 12". Fuel Mixing Bottle. Tool kit for assembly.

Bathrena Gas Powered Earth Auger Digger Fence Ground Drill Kit The auger is ideal for quickly drilling into the earth to set fence posts, poles, trees, shrubs, and more Equipped with a powerful 71cc/52cc gasoline engine, it can be easily handled by one or two people for various tasks Ergonomically designed for accuracy, ease of use, and economical operation Features a straight-through gearbox design, which is more robust and less likely to shear gears compared to side-mounted engine models