Meguiar's G18216 Ultimate Liquid Wax - 16 oz.

Meguiars Ultimate Liquid Wax features Meguiars ThinFilm technology which makes this an easy wax to apply and remove; even in full sun. Its advanced synthetic wax polymers provide extended protection with amplified reflectivity that wont leave a white residue on the vehicles trim and plastic. Meguiars Ultimate Liquid Wax is suitable for any paint type including clear coats and will enhance the color and depth of the vehicles paint. Meguiars proprietary Hydrophobic Polymer Technology increases surface tension so water beads and rolls right off. A pure synthetic Ultimate Wax provides the longest lasting protection delivers the deepest darkest reflections and a glossy wet look and is safe on all glossy paints and clear coats. Before Waxing Preparing the Vehicles Paint Surface For best re

Meguiars Ultimate Liquid Wax features Meguiars ThinFilm technology which makes this an easy wax to apply and remove; even in full sun. Its advanced synthetic wax polymers provide extended protection with amplified reflectivity that wont leave a white residue on the vehicles trim and plastic. Meguiars Ultimate Liquid Wax is suitable for any paint type including clear coats and will enhance the color and depth of the vehicles paint. Meguiars proprietary Hydrophobic Polymer Technology increases surface tension so water beads and rolls right off. A pure synthetic Ultimate Wax provides the longest lasting protection delivers the deepest darkest reflections and a glossy wet look and is safe on all glossy paints and clear coats. Before Waxing Preparing the Vehicles Paint Surface For best results start with a freshly washed and if needed clayed vehicle. Use any Meguiars wash like Ultimate Wash and Wax and Meguiars Smooth Surface Clay Kit to remove any above surface contaminants from the paint. A Few Tips About Applying Ultimate Wax One of the biggest mistakes people make when applying a wax is that they apply it too heavily. This only prolongs drying time making the wax more difficult to remove and using more product than necessary. No matter how heavy a wax is applied once its dry only so much will adhere or bond to the paint of the vehicle. Professional results every time Because of the unique chemistry employed with Meguiars Ultimate Waxes apply the wax one section at a time and then remove it after 3-5 minute initial cure time. Ultimate Waxs ThinFilm technology and synthetic polymers allow the wax to be removed even if it has not fully dried. For the easiest removal use a clean dry microfiber polishing cloth like Meguiars Supreme Shine Microfiber Towel or a 100% cotton terry towel. Please be aware that low temperatures and/or high humidity can prolong the initial curing time of Ultimate Wax. Quik Tip: One way to tell if the wax is dry and ready to be wiped off is by performing the Swipe Test. Run an index finger across the wax and if the wax smears it is not ready to be wiped off. However if its a clear swipe the wax can now be removed. Applying Ultimate Wax For best results apply in the shade to a clean cool surface one section at a time allowing 3-5 minutes of initial cure time before removing Meguiars Ultimate Liquid Wax. By Hand: 1. Using the included applicator apply a coat of Meguiars Ultimate Wax directly onto the black waxing pad. 2. Place the face of the pad flat on the vehicles paint and with light pressure in overlapping circular patterns spread the wax onto the vehicles paint surface. 3. A second pass over is recommended to insure even coverage. Let cure for 3 5 minutes before wiping of with a clean Meguiars Supreme Shine Microfiber Towel turning to a clean side for the final wipe. 4. Repeat steps 1 to 3 as needed to complete the rest of the vehicle. By Dual Action Polisher or DA Power System: 1. Attach the appropriate waxing pad to the Meguiars DA Power System (G3509) or Meguiars DA Polisher (W9207). 2. Apply a coat of Meguiars Ultimate Wax directly onto the black waxing pad. 3. Place the face of the pad flat on the paint. Turn on the Meguiars DA Power System drill or Meguiars DA Polisher and begin buffing with light pressure in an overlapping pattern while keeping the pad flat against the paint at all times. 4. Complete one section at a time allowing the