(6) JBL Control 25-1 5.25" 30w 70v Wall-Mount Commercial Restaurant/Bar Speakers

Price is for (3) Pairs of JBL Control 25-1 5.25" 30w 70v Wall-Mount Commercial Restaurant/Bar Speakers Description: Designed by JBL, these Control 25-1 loudspeakers are two-way 5.25" indoor/outdoor monitors featuring weather-protected circuitry, natural and powerful representations of the frequency spectrum, black enclosures, and JBL's proprietary InvisiBall mounting hardware. This hardware allows you to install the speakers through a hidden access point behind its logo badge. As such, the Control 25-1 suitable for venues, health clubs, theme parks, cafes, or anywhere where foreground/background music—and paging—is a necessity. These monitors are capable of handling 200W of programmatic material at 8 Ohms, and feature a built-in multi-tap transformer for operation on distributed speaker lines. With an SPL of 110 dB, you can blast these speakers pretty loudly as well, while their cone geometry ensures a pleasurable listening experience in both on- and off-axis situations. Additionally, their PEI diaphragms render a smooth high-frequency response. But sound is not the only consideration: Kapton voice coil formers, JBL's WeatherEdge rubberized extensions, and a durable cabinet construction provide protection against heat, rain, wind Features: 2 JBL Control 25-1 5.25" 100w Black Surface-Mount Speakers 4 Home/Restaurant/Bar 5.25" Woven-Fiberglass LF Drivers 0.75" PEI Diaphragm Tweeters 200W RMS at 8 Ohms Durable, Weatherized Enclosures InvisiBall Mounting Hardware Zinc-Plated Grilles Good for Off-Axis Listening 60 Hz to 20 kHz Frequency Response Specifications: Power Rating: 200 W continuous program (2 h). 100 W (400 W peak), continuous pink noise (2 h). 75 W (300 W peak) continuous pink noise (100 h) Nominal Impedance: 8 ohms (THRU setting) Maximum Input Voltage: 25.3 V RMS (2 h), 50.6 V peak Frequency Response± 3dB: 85 Hz to 17 kHz Frequency Response ±10 dB: 60 Hz to 20 kHz Sensitivity: 90 dB, 1 W / 1 m (average 100 Hz to 10 k Hz) Coverage Angle: 100° x 100° Directivity Factor: 6.0 (averaged 1 kHz to 16 kHz) Directivity Index: 7.6 dB (averaged 1 kHz to 16 kHz) Crossover Type: 2nd order low-pass, 2nd order high-pass Transformer Taps: 70 V: 30 W, 15 W, 7.5 W, 3.7 W, 100 V: 30 W, 15 W, 7.5 W. Insertion loss < 0.94 dB at any tap setting. Thru setting: 8 Ohms nominal Recommended Protective High-Pass: 60 Hz high-pass (24 dB/oct) (for 8 Ohms operation and for all 70 V / 100 V taps settings) LF Driver Size: 5.25" / 135 mm HF Driver Size: 0.75" / 19 mm Driver Type: LF Driver: Woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp Kapton voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure. HF Driver: PEI diaphragm, low-viscosity ferro-magnetic fluid, and Kapton voice coil former Enclosure Material: High-impact polystyrene (HIPS) Grille: Highly zinc-plated, finished in durable TGIC polyester powder-coating Termination: Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2) Environmental: IP-44 per IEC529; exceeds MilSpec 810 for humidity, salt-spray, temperature & UV; passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray Agency Rating: ROHS

Features: 2 JBL Control 25-1 5.25" 100w Black Surface-Mount Speakers 4 Home/Restaurant/Bar. 5.25" Woven-Fiberglass LF Drivers. 0.75" PEI Diaphragm Tweeters. 200W RMS at 8 Ohms. Durable, Weatherized Enclosures. InvisiBall Mounting Hardware. Zinc-Plated Grilles. Good for Off-Axis Listening. 60 Hz to 20 kHz Frequency Response. Specifications: Power Rating: 200 W continuous program (2 h).100 W (400 W peak), continuous pink noise (2 h).75 W (300 W peak) continuous pink noise (100 h) Nominal Impedance: 8 ohms (THRU setting). Maximum Input Voltage: 25.3 V RMS (2 h), 50.6 V peak. Frequency Response 3dB: 85 Hz to 17 kHz. Frequency Response 10 dB: 60 Hz to 20 kHz. Sensitivity: 90 dB, 1 W / 1 m (average 100 Hz to 10 k Hz). Coverage Angle:100 x 100. Directivity Factor: 6.0 (averaged 1 kHz to 16 kHz). Directivity Index: 7.6 dB (averaged 1 kHz to 16 kHz). Crossover Type: 2nd order low-pass, 2nd order high-pass Transformer Taps: 70 V: 30 W, 15 W, 7.5 W, 3.7 W, 100 V: 30 W, 15 W, 7.5 W. Insertion loss < 0.94 dB at any tap setting.Thru setting: 8 Ohms nominal. Recommended Protective High-Pass: 60 Hz high-pass (24 dB/oct) (for 8 Ohms operation and for all 70 V / 100 V taps settings). LF Driver Size: 5.25" / 135 mm. HF Driver Size: 0.75" / 19 mm Driver Type: LF Driver: Woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp Kapton voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.HF Driver: PEI diaphragm, low-viscosity ferro-magnetic fluid, and Kapton voice coil former. Enclosure Material: High-impact polystyrene (HIPS). Grille: Highly zinc-plated, finished in durable TGIC polyester powder-coating Termination: Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Environmental: IP-44 per IEC529; exceeds MilSpec 810 for humidity, salt-spray, temperature & UV; passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Agency Rating: ROHS-compliant; Transformer UL Recognized per UL1876