XYZprinting Water-Soluble PVA Filament (For da Vinci 2.0 Duo ONLY)

XYZprinting?s Water-soluble filament is the perfect support material for all of your complex and intricate da Vinci 2.0 Duo prints. When printing is complete, immerse your object in clean water at ambient temperature until the material dissolves and falls apart from the object.

Clean Prints Every Time: Removing support material by hand, tools, or solutions can be tedious and they do not always provide the best results. The Water-soluble filament is sturdy enough to provide excellent support for your PLA prints and dissolves well enough that it does not damage the print. Comes in 600g per pack. Easy to Install Cartridge System: The Water-soluble filament is conveniently stored within an easy-to-use cartridge and uses a chip that enables you to keep track of how much filament the spool has left. Read Before Using XYZprinting?s Water-soluble Filament: Compatible with da Vinci 2.0 Duo and da Vinci 2.0 Blue Duo. Please make sure to download the latest firmware and software for your 3D printer and XYZware. 1. A separate extruder is needed before installing the Water-soluble filament. An extruder with ABS filament residue may cause the Water-soluble filament to clog. 2. XYZprinting?s Water-soluble filament can only be used with PLA (do NOT attempt to use with ABS). 3. The Water-soluble filament absorbs water fairly quickly, so it must be stored in low-moisture environments in order to improve its longevity. 4. To increase the success rate of loading the filament, please insert the Water-soluble filament into the guide tube until the material has reached the drive gear. Then, grasp the release arm and push the filament downward slightly (about 1 to 2 cm). Once it is inserted, let go of the release arm and run ?LOAD FILAMENT.