Acoustic Audio HT57 Flush Mount 7 Speaker Set In Wall and Ceiling Home Theater

Acoustic Audio by Goldwood HT57 Flush Mount 7 Speaker Set Center Channel with Front, Middle and Rear, Right and Left home theater configuration Wide Sound Dispersion Designed Speakers easily integrate with new and existing audio systems Traditional Passive speaker design, simply drive power from your home audio receiver or amp Flush Mount low profile housings install easy with unique Pressure Lock Mounting System 5 Pieces of IW191 In Wall Wired Speakers 5.25" High Rigidity Polypropylene cone woofers with butyl rubber surrounds 12mm Soft Dome tweeters Frequency response is 40Hz-22 kHz with 97dB at 8ohm Fits rectangular speaker hole size of 6.25" x 9.5" with a mounting depth of 3" Overall speaker size of 7.625" x 11.125" with Spring Loaded raw wire connections 2 Pieces of R191 In Ceiling Wired Speakers 5.25" High Rigidity Polypropylene cone woofers with butyl rubber surrounds 12mm Soft Dome tweeters Frequency response is 45Hz-22 kHz with 95dB at 8ohm Fits round speaker hole size of 6.625" with a mounting depth of 3" Overall speaker size of 7.625" with raw wire clamp or solder connections Pressure Lock Mounting System clamps tight to drywall with No Hardware Needed Durable ABS Housings and Removeable Grills can be painted to match your decor System Requirements Any home audio receiver or amplifier with raw speaker wire outputs Your receiver power should be no less than 10 and no more than 200 watts per channel CL3 Rated in wall certified raw speaker wire to connect your receiver to the speakers Applications Home Theater Surround Sound Systems Whole House Audio Systems Business or Retail Installations What's in the box 7 Flush Mount Passive Speakers with Removeable Grills Cut-Out Templates Instruction Manual

Acoustic Audio HT57 Specialty Series In Wall and In Ceiling 2-Way 7 Speaker Set; 5 Pieces of IW-191 In Wall Speakers; 2 Pieces of R-191 In Ceiling Speakers; Recommended Power is 20-200 Watts per speaker; Frequency Response is 40Hz-22 kHz; Crossover Frequency is 2200Hz; Efficiency/Sensitivity is 97dB at 1 watt 1 meter; Impedance is 8ohm; 2-Way Design and Functionality; 5.25" Woofers; High Rigidity Polypropylene Cones with Extended Throw Drive Assemblies; Butyl Rubber Surrounds For Increased Performance and Durability; 12mm Soft Dome Tweeters; Tweeters Pivot on IW-191 Speakers; All Weather Design For Indoor And Outdoor Use; Paintable Frames and Grills; Low Profile Housing Designed For Easy Installation; Integrated Wall-Lock Mounting System; Cut-Out Templates Included For Easy Installation; IW-191 In Wall Speaker Cut Out Size is 6.25" x 9.5", Overall Size is 7.625" x 11.125" and Mounting Depth is 3"; R-191 In Ceiling Speaker Cut Out Size is 6.625", Overall Size is 7.925" and Mounting Depth is 3"; Designed And Engineered In USA; Full Instructions Included; Use for In Wall or In Ceiling Home Entertainment, Surround Sound, Home Theater or Multiple Room System; This Listing and Price is for 1 Complete 7 Speaker Set