Aguilar OBP-3TK Onboard Preamp

Product DescriptionThe OBP-3 is Aguilar's most flexible onboard preamp design, providing +/-18dB of cut and boost at 40Hz, +/16dB of cut and boost at either 400Hz or 800Hz and +/16dB of treble cut and boost at 6.5 kHz. The OBP-3 has multiple wiring options, and can be wired with either a mini-toggle or internal dip-switch for midrange frequency selection.The OBP-3 is Aguilar's most flexible onboard preamp design, providing +/-18dB of cut and boost at 40Hz, +/16dB of cut and boost at either 400Hz or 800Hz and +/16dB of treble cut and boost at 6.5 kHz. The OBP-3 has multiple wiring options, and can be wired with either a mini-toggle or internal dip-switch for midrange frequency selection. The OBP-3TK includes separate Treble, Mid, and Bass pots,and a black mini-toggle switch for Midrange frequency selection. Bass control: plus/minus 18 dB @ 40 Hz. Mid control: plus/minus 16 dB @ 400Hz or 800 Hz. User selectable frequency center. Treble control: plus/minus 16 dB @ 6.5 KHz. Input impedance: 1 meg ohm Output impedance: 100 ohm 9 or 18 volts operation. Additional 6dB with 18 volts. Distortion: .019 into 10k ohm load Noise: -95 dBm unweighted. Battery life: 324 hours Wire lead length: 6.50 inches Low noise discrete FET input stage, center detent 50 K linear pots,with a dual concentric pot available. Dimensions: 0.98"W x 0.98"L x 0.59"D Warranty: Three year limited warranty.

Has multiple wiring options; can be wired with a push/pull pot, mini-toggle or internal dip-switch for midrange frequency selection Aguilar preamps have high headroom, low distortion and reproduce the full dynamic range of your instrument OBP-3TK – 3-Band, Boost/Cut 9 or 18V On-Board Preamp