Anqidi 63CC 2 Stroke Gas Powered Post Hole Digger Earth Auger Machine Plant Fence Ground Drill w/12" Single Leaf Bit, 3HP 7500rpm

It is a two-stroke post-hole digger made of aluminum alloy and PP with a drill rod made of steel. It has a strong power of 3HP and 7,500rpm/min, which can save your time and effort in digging holes quickly. And it operates with low noise, giving you a more comfortable user experience! Suitable for garden and lawn drilling, digging post holes, removing soil, soil tillage, planting bedding, bulbs, seedlings or fertilizing shrubs, passing water, controlling weeds and removing roots, etc. How to Mix Oil: 1.In the ratio of 25 (gasoline):1 (motor oil), add gasoline and motor oil separately and cover with a lid. 2.Just shake them well. How to Start: 1.Press the Oil Bubble: Before each start, you have to press the oil bubble to supply oil. And once you press and release, you can suck the oil into the oil pipe. 2.Push up to Close the Damper: Close the dampers in the cold machine state, the machine is easier to start. 3.Pull the Handle: Pull 5-8 times, when you hear the sound of ignition of the machine then push the damper back. 4.Push down to Open the Damper: Pull the start handle again and pull 1-3 times to start normally. Specification: Color: Black, Red Engine Model: 1E48F Engine Type: Single-cylinder Air-cooled Two-stroke Gasoline Engine Displacement: 63cc Drill Type: Single Leaf Post Hole Digger Material: Aluminum Alloy, PP Drill Rod Material: Steel Max. Power: 2.2KW Horse Power: 3HP Turbine Reduction Ratio: 34:1 Rotational Speed: 7500rpm/min Fuel Type: Mixed Oil (Gasoline + Engine Oil) Fuel Ratio: 25 (Gasoline):1 (Engine Oil) Recommended Drill Diameter: 150-250mm/ 5.91-9.84in Post Hole Digger Size: 55*39*34cm/ 21.65*15.35*13.38in Drill Bit Length: 80cm/ 31.49in Drill Spiral Diameter: 30cm/ 12in Post Hole Digger Package Size: 57*42*34cm/ 22.44*16.54*13.39in Drill Rod Package Size: 81*31*31cm/ 31.89*12.2*12.2in Post Hole Digger Net Weight: 10kg/ 22.05lbs Post Hole Digger Gross Weight: 11.6kg/ 25.57lbs Drill Rod Gross Weight: 6kg/ 13.23lbs Package Included: 1* Post Hole Digger 1* Drill Bit 1* Funnel 1* English User's Manual All Accessories Needed Note: 1.Please note that it can only be used for dirt work and not for rock, stone or metal, or gravel surfaces. 2.Please be sure to use two-stroke oil, not four-stroke oil or other engine oil, otherwise, it will quickly cause serious damage to internal engine parts. 3.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement.

✔️Use a two-stroke engine, stable operation, and fewer parts, so you have a good feeling while also convenient maintenance ✔️The spiral drill bit makes it possible to drill faster and with a speed of up to 7,500 rpm/min, which can fully satisfy your needs ✔️The post-hole digger has large cooling holes to ensure continuous work without stalling while extending its service life ✔️Adopt an enlarged gearbox, which can work stably and with low noise, reducing noise troubles for your trenching work ✔️A thicker handle design, ergonomic so that you feel comfortable to grip ✔️The handle surface with a textured design also strengthens its non-slip nature, making it easy for you to use ✔️The drill pipe is a removable design, which is easy for you to store and replace ✔️Designed with a manual recoil to start an easy fuel delivery system for quick start action, making it more convenient for you to use ✔️It has a built-in translucent fuel tank that allows you to easily track the proper fuel level ✔️Adopt a fine technology carburetor, which can make gasoline fully burned when running, avoiding gasoline waste and saving money