Cimiva Happymodel Mobula 7 75mm Crazybee F4 Pro OSD 2S Bwhoop FPV Racing Drone

Features:1. The 2S indoor whoop rider has more power and longer flight time.2. Integrated injection molding Tiny Whoop structure.3. Frsky and Flysky version highly integrated motherboards integrate OSD, Dshot ESC, 2.4G SPI receiver, and galvanometer.4. DSM2/DSMX version flight control integrates OSD, Dshot four-in-one ESC, 2.4G serial receiver and galvanometer.5. The Frsky EU-LBT version of the external Frsky XM+ receiver supports the EU-LBT version of the remote control.6. Integrate Betaflight OSD function, keep abreast of the flight voltage and receiver signal, and fly more calmly.7. The VTX comes with Smartaudio function, which can adjust the flight control parameters through the OSD, adjust the flight control PID, and adjust the VTX frequency point parameters.8. Completely assembled and debugged, and the remote control will fly when you get it.9. The tilt angle of the camera is adjustable.10. Tip: Since the aircraft is powered by two 1S batteries in series, and the aircraft supports 1-2S power supply, please be sure to land when the voltage of a single cell is lower than 2.9v or the buzzer starts to alarm to avoid over-discharge of the battery.Description:Crazybee F3 PRO flight controller supports 1-2S lithium battery, Betaflight tuning, multiple flight modes, and integrated buzzer.Specifications:Brand: HappymodelModel: Mobula7Wheelbase: 75mmSize: 98*98*36mmWeight: 25.8g (without battery)Take-off weight: 40 grams (including battery)Package Included:1* BWHOOP 75mm FPV Drone1* Crazybee F3 PRO flight control integrated ESC OSD receiver4* SE0802 KV16000 brushless motor8* 40mm cw/ccw positive and negative propellers1* 5.8g 40CH 25MW video transmission+700TVL 1/4 CMOS camera1* 3.8v 250mah (PH2.0) 30/60C lithium battery1* Battery holder1* 6 way charger1* Propeller removerNotes:1. Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from real object.

the external Frsky XM+ receiver supports the EU-LBT version of the remote control.6. Integrate Betaflight OSD function, keep abreast of the flight voltage and receiver signal, and fly more calmly.7. The VTX comes with Smartaudio function, which can adjust the flight control parameters through the OSD, adjust the flight control PID, and adjust the VTX frequency point parameters.8. Completely assembled andDescription:Crazybee F3 PRO flight controller supports 1-2S lithium battery, Betaflight tuning, multiple flight modes, and integrated buzzer.Specifications:Brand: HappymodelModel: Mobula7Wheelbase: 75mmSize: 98*98*36mmWeight: 25.8g (without battery)Take-off weight: 40 grams (including battery)Package Included:1* BWHOOP 75mm FPV Drone1* Crazybee F3 PRO flight control integrated ESC OSD receiver4* SE0802 KV16000 brushless motor8* 40mm cw/ccw positive and negative propellers1* 5.8g 40CH 25MW video transmission+700TVL 1/4 CMOS camera1* 3.8v 250mah (PH2.0) 30/60C lithium battery1* Battery holder1* 6 way charger1* Propeller removerNotes:1. Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from real object.