Cooper Power Systems 600 A 35Kv Insulated Standoff Bushing Isb635A

The Cooper Power Systems 600 A, 35 kV Insulated Standoff Bushing meets the full requirements of IEEE Std 386™ standard — Separable Insulated Connector Systems and provides a single deadbreak interface made of high quality insulating epoxy material. It is used in pad-mounted cabinets, underground vaults, and other apparatus to isolate and sectionalize an energized cable. Temporary or permanent parking of energized 600 A 35 kV deadbreak connectors that conform to IEEE Std 386™ standard is simplified with the use of insulated standoff bushings. The Insulated Standoff Bushing is designed to be installed in the parking stand mounted on a transformer or other apparatus. A drain wire lug is provided on the standoff bracket for attachment of a drain wire to ensure deadfront construction. The bushing provides a fully-shielded, submersible connection for deadbreak operation. The Cooper Power Systems 600 A, 35 kV Grounded Standoff Bushing is designed to be installed in the parking stand bracket mounted on the transformer or other apparatus. A 2/0 AWG copper, 5-foot jacketed cable is connected to the all-aluminum bushing for attachment to system ground. The bushing provides a fully visible ground and submersible connection for temporary or permanent parking of 600 A deadbreak connectors that conform to IEEE Std 386™ standard. All standoff bushing brackets have a stainless steel eyebolt with a brass pressure foot. The bushing body is bolted to a stainless steel base bracket using a stainless steel bolt. Special pins ensure firm location of the bushing on the bracket.

Cooper Power Systems 600 A 35Kv Insulated Standoff Bushing Isb635A