DMX512 DMX Dfi DJ Wireless system Receiver and Transmitter 2.4G 126 Channels for LED Stage Lighting 500m Control

This receiver/transmitter can help you to get rid of countless wire. And it is quite convenient to use since male plug can be match with many female plug. Work frequency section: 2.4GHz ISM band,126 channels frequency section. Ideal for stage lighting control. You can have a try.Features:High effective GFSK modulate, communication design.126 channels jumping frequency automatically, high -jamming ability, to ensure works reliability.2.4G wireless DMX512 receiver/transmitter, witn 500m communication distance (visible distance).No time delay when signal data is transmitting, signal data is real time and reliably.DMX512 wireless receiver transmits standard DMX514 protocol data (generated by console) by wireless way.Work frequency section: 2.4GHz ISM band,126 channels frequency section.7 Groups code settable, user can use 7 groups individual wireless net without any interference with each other in the same place.The DMX512 wireless controller is ideal for stage lighting control.One transmitter can control many receivers.With tricolor LED displaying indicators, the wireless DMX512 can be used in all DMX lamps.Without wires, it's the perfect way to get rid of the trouble of winding wire.This product has a male plug and female plug distinction, the male plug (transmitter) is connected to the console, the female plug (receiver) is connected to the light.Operating manual:code and LED color corresponding relationship:1: RED2: GREEN3: RED+GREEN4: BLUE5: RED+BLUE6: GREEN+BLUE7: RED+GREEN+BLUE1). Press momentary switch above the side led indicator to indicate setting.2). Press again to set IC, to the color desired, adding 1 each time you press the switch will advance the color idcode.3). Working condition:LED constant lit up: No DMX or wireless signal.Red LED flash: Transmitting.Green LED flash: Receiving4) RF frequency 2.400 - 2.525G, total 126 channels, it's searching automatically.5). Code "1-7" groups code, press button for setting, it only can work under same code of transmitter and receiver. ( Same LED Color )Establishing Communication:1. Power on DMX512 wireless received board first and then following to power up the transmitted board.2. Press button to set same value of transmitted board and received board. Please use different value if you need use more than 1 group wireless universals at same time in same place.3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flashes until received  same value, the more DMX data, the faster the LED flashes.4. Communication was established correctly.Specifications:Name: 2.4G wireless DMX512 ReciverMaterial: zinc alloyInput voltage: 5VDC 500mA MINReceiver Sensitivity: -94dBmCPU: 32-bit ARM CoreModulation: GFSKDMX signal interface: RS485Automatic reboot trigger: Built-in WDTCommunication distance: 500M (visible distance)Work frequency section: 2.4G ISM, 126 channelsItem weight: 125g / 4.41ouncePackage size: 90 * 21mm / 3.54 * 0.83inPackage weight: 185g / 6.53ouncePackage list:1 * Receiver1 * Adapter (according to your choice)

High effective GFSK modulate, communication design.126 channels jumping frequency automatically, high -jamming ability, to ensure works reliability.2.4G wireless DMX512 receiver/transmitter, witn 500m communication distance (visible distance).No time delay when signal data is transmitting, signal data is real time and reliably.DMX512 wireless receiver transmits standard DMX514 protocol data (generated by console) by wireless way.