Excelvan Condenser Microphone+ 6 inch Microphone Pop Filter Wind Screen+ Arm Stand

Excelvan Condenser Microphone With Shock Mount Black Pop Filter Wind Screen Microphone Scissor Arm StandFeatures(microphone):-Tailored frequency response provides vocal intelligibility and crispness-Neodymiun magnet for high signal-to-noise ratio-Shock Mount to reduces handling noise-Cardiod(undirectional)pickup pattern supresses feedback-Brand:Excelvan-Polar Pattern:Uni-directional-Frequency Response:20Hz-20kHz-Sensitivity:45dB±1dB-Output Impedance:1500Ω±30%(at 1kHz)-Load impedance:≥1000 Ω-Equivalent Noise level:16dBA-Electrical current:3mA-Microphone output interface:3.5mm-Use of voltage:48V phantom power supply-Wire:3.5 inserted audio interface,3 meter long-Microphone body weight:230g-Size:Approx.16 x 5 x 5cm/6.3 x 1.97 x 1.97inch-Microphone Material:Steel net Zinc alloy hand holding part-Color:BlackFeatures(Pop Filter):-External diameter:155mm-Convenient to Install and Use- Universal MIC Stand Mounting Bracket- Ideal Product To Reduce P-pops In Recording- Compatible with Personal Studio,Recording,Video Chat,Broadcasting And Radio Hosting- Double-layer net diameter:130mm- Tube length:375mm- Tube diameter:8mm- Mounting clamp can clip up to 35mm(clamp adjustable)- 360 Degree Swivel Mount Flexible Holder can be Arbitrarily DistortedFeatures(Scissor Arm Stand):- Ideal for radio broadcasting studio,voice-over sound studio and so on- Made of all steel construction- Stable,Tough,and Affordable- Can be mounted on the announcers' desk with the metal mounting base- The XLR male to female microphone cable is already installed hidden inside the boom arm tubing enhancing the scissor suspension microphone stand's overall appearance.- The double-braced arms add strength.Your microphone can be held safely on this scissor arm microphone mount.- With a standard microphone clamp to mount any standard-sized handheld microphone- Steel Construction:(9mm*9mm cross-section)- The Arm Stand can support up to 2KG- The standard microphone clamp can hold the microphone diameter about 27mm.(for the large diaphragm condenser microphone,you need to buy an extra Shock Mount to replace the clamp)- The Mount base can be installed onto the desk up to 55mm thickness- Weight of arm stand:850g- Each arm measures:36cm(14.1 inches)Package Included-1x Black Microphone-1xShock Mount-1x Power Cord-1x Anti-wind foam cap-1x User Manual-1x Pop Filter Wind Screen-1xArm Stand body-1x Clip for standard Dynamic Microphone,etc.-1x Mounting base(for desktop or other boards)-1x Screw nut-1x XLR Male to XLR Female cable(already installed hidden inside the boom arm tubing)

Standard screw adapter, you can mount it on all the standard microphone standsIdeal for radio broadcasting studio, voice-over sound studio, recording and so onFeatures an angle adjustment with locking knobFoam insert to hold and protect microphone