FONTA ABCD Wireless RF Remote Control 433MHz Electric Gate Key Controller (1pc)

Feature: This remote control is a copy of the remote control, code, copy the original remote control (original remote control to be able to use normally, the same frequency). Specification: Product Material: ABS Quantity: 1pc Rated voltage: 12 V Rated current: 12 mA Installation mode: wireless Corresponding frequency: 433MHZ Modulation mode: ASK (AM) Wireless transmitting distance: 50-100m (scope of application: garage door, alarm, automatic door, curtain door, lamps, alarm) Chips in the copy range: 2260, 2262, PT2264, 5326, SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527, 1527, 2240 Product size: 60*30*15mm/2.36*1.18*0.59'' Packing weight: 30g Method of Copying: 1. Code cleaning method: Press the unlock button and lock button at the same time(some shells are the up button and down button), after the LED indicator light flashes three times, loosen any one of the buttons while the other is kept pressing, then push the released button three times, the LED indicator will enter into the fast flashing status. At this time all the memory data is cleared, the cleaned remote control will not have lighting LED indicator no matter which button you press. 2. Copying: One hand keeps the original remote controller, while another keeps the copy remote control, the two remote controls should be placed as closely as possible (the ideal situation is to put the two remote controls on the desktop side by side with zero distance), respectively press down the copy button, when the LED indicator light flashes quickly after three flashes, this copy is successful, other key operating methods are the same. Some remote control has a smaller transmitting power, so the original remote control should be placed back to the copy remote control to be operated. For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing code. 3. Tips: if you reset the code of remote control and want to recover, press two keys until LED light flicks. Warm Tips: In the configuration and selling process, most clients wish to replace the original remote control with a general remote control, You may configure your remote control within 20 seconds if you meet the following three conditions: Condition I: the original remote control may be used normally. Condition II: know the transmission frequency of original remote control (referring to the following diagram) whether the frequency is 433.92MHZ or not. Condition III: IC of original remote control is2260(all manufacturers);2262(All manufacturers);PT2264, 5326(All manufacturers);SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918series,527(All manufacturers);1527(All manufacturers);2240(All manufacturers); Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understand. Included: 1 X ABCD Wireless RF Remote Control 1 X User Manual

This remote control is a copy of the remote control, code, copy the original remote control (original remote control to be able to use normally, the same frequency)