Greenway’s Rain Coat Ceramic Detail Spray

Will not be degraded by extreme temperatures Zero drying time, curing time etc. Re-coat instantly UV absorber additive Updated fine mist full finger; trigger will be provided with 8 ounce, 16 ounce and 32 ounce. This makes application easier and more cost effective Works excellent as a ceramic booster if your vehicle is already ceramic coated Pleasantly scented Please note: This coating DOES NOT REMOVE SCRATCHES, SWIRL MARKS, OXIDATION, AND OTHER PAINT DEFECTS. THIS COATING WILL NOT ADHERE TO A SURFACE THAT HAS A WAX, POLYMER, OR ANY OTHER TYPE OF COATING APPLIED TO THE SURFACE. YOU NEED TO CLAY BAR YOUR VEHICLE, POLISH IF YOU WANT THE ULTIMATE PAINT, REMOVE ANY RESIDUE WITH RUBBING ALCOHOL IF NEEDED AND DO NOT APPLY ANY SEALANT, WAX ONTO THE PAINT!! THIS COATING SHOULD BE APPLIED BY THE INDIVIDUAL WHO UNDERSTANDS AUTO DETAILING! IF THIS IS NOT YOU AND YOU DO NOT WANT TO LEARN, PLEASE DO NOT PURCHASE THIS PRODUCT! WE ARE HERE TO HELP, BUT ONLY CAN HELP IF YOU REACH OUT TO US!! Paint Preparation: The most important application method is to make sure that the surface is properly cleaned. You will need to remove any wax, sealant, ceramic or any other protective coating that is on the surface. This can be completed by using our Cleanse Shampoo during the wash stage, or a rubbing alcohol/water mixture can be completed after the washing and drying stage. If the vehicle has any type of overspray or other particles on the clearcoat, please remove these items by using a clay bar or fallout remover Application: After completing the drying stage Rain Coat can be applied to the dry surface. Simply spray Rain Coat onto the surface and wipe off. You will notice that the product quickly evaporates allowing ease of use and only a small amount is needed to complete the entire vehicle. Typically, 2 ounces to 6 ounces of product is all that is needed in order to coat an entire vehicle. We recommend using a quality microfiber towel to apply and remove the coating. As you apply the ceramic coating, you will observe that most of the product will actually "flash" off the surface which will allow for less wiping, quicker application and reduce the chance of marring. Maintenance: You can use any standard pH balanced shampoo when washing your vehicle, but we do not recommend using shampoos with wax in them. While the wax will not harm the coating, the wax will alter the appearance the coating creates as well as the characteristics of the water and dirt behavior. You will notice when the vehicle is has a large amount of dirt on the surface, the water sheeting ability is not as apparent, but PROTECTION IS NOT COMPROMISED.Simply wash and dry the vehicle which will allow for characteristics of Rain Coat to return. Durability: Rain Coat can be layered and can hold up to three layers. Applying two layers can give 6 months to 9 months of protection, while a single layer lasts 2 months to 3 months. We also refer to protection and longevity as typical daily driving of your vehicle.These are true figures of the actual effective life of Rain Coat and not an erroneous claim which has harmed the coating industry. Driving your vehicle through a touchless car wash or using heavy degreasers on the vehicle will greatly affect the longevity of the coating. We recommend hand washing of your vehicle if possible, to avoid the low pH and high pH aggressive pre-soaks that can be used on many touchless car washes.

Creates the ultimate hydrophobic surface Excellent contact angle of water droplets is displayed on the surface which helps with drying, self-cleaning and repelling debris. Adds excellent depth, gloss and slickness to the surface Can be applied on dry surface Spreads thin that typical coverage is 2 ounces to 6 ounces for an entire vehicle Flashes quickly and is streak-free. Coating can be applied in minutes after surface is properly prepped Helps to greatly reduce the chance of acid rain spotting Can be layered up to 3 coats to provide up to 9 months of protection Use on paint, plastic, metal and glass