INTBUYING YD-1 Manual Pressure Display Troche Tablet Hardness Tester

Product Overview The machine is controlled by single-chip microcomputer, high-precision pressure sensor, and digital display of hardness value. Manual pressure, support continuous measurement, automatic lock reset. Product Parameters Model: YD-1 Voltage: AC110 50/60Hz Power: 10W Hardness range: 0-200N Hardness accuracy: ±0.5% Diameter test range: 0-0.79"(0-20mm) Continuous working time: ≥24h Product size: 12.4"*7.9"*4.1"(31.5cm*20cm*10.5cm) Packing size: 15.7"*10.2"*8.3"(40cm*26cm*21cm) Net weight: 8.1lb(3.7kg) If you need other more advanced troche hardness tester, please contact us!!! Product Features & Advantages - System can realize automatic display, automatic latch, automatic reset, automatic cycle test, automatic linear error correction, automatic fault diagnosis. - High precision pressure sensor and AD converter to ensure the accuracy and reproducibility of the test. - The loading manual, manual press, simple operation. - To provide unit conversion functions, can realize the test before and after conversion. - Digital calibration and zero adjustment. Item Included INTBUYING Hardness tester *1 Clean brush *1 The power cord *1 English instruction manual *1 (056197)

【Squeeze the Knob】The pressure can be precisely adjusted manually, the hardness value of the tablet can be accurately displayed, and the test accuracy can reach 0.05 kgf. 【Support legs】There are four rubber support legs at the bottom to prevent the fuselage from slipping and corroding. Make the machine more stable in use and ensure the accuracy of the results. 【Sensor】The sensor supports measuring 0-20mm tablets, with high precision, and the surface is coated with aluminum oxide, which is more convenient to clean. 【 Setting Knob】The machine comes with a knob, which can be manually reset for each test. 24 hours of continuous testing. 【Operation】Manual loading and pressing, easier operation.