JBL Amplifier+8) Rockville Office/Restaurant/Bar/Cafe Drop Ceiling Tile Speakers

Package Includes: (1) JBL CSMA240 Commercial/Restaurant 2 x 40w Amplifier 4ohm/8ohm/70V/100V, 8 inputs(8) Rockville DCS8T 70V Commercial 8" Drop Ceiling Tile Speaker For Office/Business Description of CSMA240: Designed for commercial and industrial use, the CSMA 240 Commercial Series Mixer/Amplifier from JBL is a mixer/amplifier with eight mixer-channel inputs and two output channels. It's capable of reaching 40W of peak power with 5W per channel. The unit's front panel sports volume controls for each channel, as well as two master volume adjustment knobs, two sets of bass and treble controls, and a power switch. The volume controls are illuminated so they can be seen and operated in darkened environments. Features of CSMA240: JBL CSMA240 Commercial/Restaurant 2 x 40w Amplifier 4ohm/8ohm/70V/100V, 8 inputs For Commercial and Industrial Use 40W into 8 or 4 Ohm Loads 5W Per Channel 8 Input Channels, 2 Output Channel Usable with 70 & 100V Systems Euroblock Mic/Line & RCA Inputs Hi-Z & 27V Phantom Power Switches Sleep Mode & 2 Auxiliary Outputs Voice Activated Ducking & Priority Mute Specifications of CSMA240: Maximum Output Power: 40 W per channel into 4 Ohms or 8 Ohms, 1 kHz, = 0.5% THD Insertion Loss: 1 dB maximum for 70 and 100 V outputs Continuous Power: 5 W per channel Line Output Level: 5.0 V RMS into 10 kOhms Input Sensitivity: To obtain full rated power at 8 Ohms (or 5 VRMS to line output). Mic Input: 3 mV RMS. Line Input: 775 mV RMS. RCA Input: 300 mV RMS Number of Channels: Input: 8, Output: 2. Frequency Response: Measured at 2.83 V RMS into rated load impedance at any output. 4/8 Ohms Output: 20 Hz - 20 kHz, ±2 dB. 70 V/100 V Outputs: 80 Hz - 15 kHz ±2 dB. Line Out: 20 Hz - 20 kHz, ±1 dB Total Harmonic Distortion (THD): Measured at 2.83 V RMS into rated load impedance at any output. Power Amplifier Output: <0.5%, 20 Hz to 20 kHz. Line Output: 0.05% typical Signal to Noise Ratio: > 90 dB Nominal Input Impedance: Mic: 400 Ohms. Line: 20 kOhms (balanced). RCA: 50 kOhms. Minimum Load Impedance: Low Impedance Output: 4 Ohms. 70 V Output: 120 Ohms. 100 V Output: 240 Ohms.Description of DCS8T: The DCS8T is the perfect solution to quickly and easily add speakers to rooms with standard drop ceiling tiles that measure 2 feet by 2 feet. Simply remove the ceiling tile where you want to put the speaker and put this one on its place. Run the speaker wire and you're installation is complete. Features of DCS8T: Rockville DCS8T 70V Commercial 8" Drop Ceiling Tile Speaker For Office/Business Built in 8” highly efficient speaker pre-mounted into a ceiling tile Easy installation fits perfectly into 2 feet x 2 feet standard-sized US drop ceilings. Simply drop it in and connect the speaker wire Metal grill Works for both 70 volt and 100 volt operation or even 8 ohm Multi-tap options: 10W, 5W, 2.5W, 8 Ohm 30 Watts RMS power handling at 8 ohms Low profile mounting depth (3.9”)<

Package Includes: (1) JBL CSMA240 Commercial/Restaurant 2 x 40w Amplifier 4ohm/8ohm/70V/100V, 8 inputs, (8) Rockville DCS8T 70V Commercial 8" Drop Ceiling Tile Speaker For Office/Business Features of CSMA240: JBL CSMA240 Commercial/Restaurant 2 x 40w Amplifier 4ohm/8ohm/70V/100V, 8 inputs, For Commercial and Industrial Use, 40W into 8 or 4 Ohm Loads, 5W Per Channel, 8 Input Channels, 2 Output Channel, Usable with 70 & 100V Systems, Euroblock Mic/Line & RCA Inputs, Hi-Z & 27V Phantom Power Switches, Sleep Mode & 2 Auxiliary Outputs, Voice Activated Ducking & Priority Mute Specifications of CSMA240: Maximum Output Power: 40 W per channel into 4 Ohms or 8 Ohms, 1 kHz, = 0.5% THD, Insertion Loss: 1 dB maximum for 70 and 100 V outputs, Continuous Power: 5 W per channel, Line Output Level: 5.0 V RMS into 10 kOhms, Input Sensitivity: To obtain full rated power at 8 Ohms (or 5 VRMS to line output). Mic Input: 3 mV RMS. Line Input: 775 mV RMS. RCA Input: 300 mV RMS, Number of Channels: Input: 8, Output: 2. Features of DCS8T: Rockville DCS8T 70V Commercial 8" Drop Ceiling Tile Speaker For Office/Business, Built in 8" highly efficient speaker pre-mounted into a ceiling tile, Easy installation fits perfectly into 2 feet x 2 feet standard-sized US drop ceilings. Simply drop it in and connect the speaker wire, Metal grill, Works for both 70 volt and 100 volt operation or even 8 ohm Multi-tap options: 10W, 5W, 2.5W, 8 Ohm, 30 Watts RMS power handling at 8 ohms, Low profile mounting depth (3.9"), Spring loaded speaker terminals, Sensitivity: 91 dB, Designed to sound great for speeches, announcements, music, and chimes, 105 degree dispersion pattern