JBL CSMA240 Commercial Amplifier+(8) 8" In-Ceiling Speakers+(2) Wall Controllers

Package Includes: (1) JBL CSMA240 Commercial/Restaurant 2 x 40w Amplifier 4ohm/8ohm/70V/100V, 8 inputs (2) Pairs of JBL 8128 8"" Full Range Commercial 70V/100V 6w Ceiling Speakers 4 Restaurant (2) JBL CSR-V Black Wall Volume Controller For Select CSM/CSMA/VMA Mixer Amplifiers Features: JBL CSMA240 Commercial/Restaurant 2 x 40w Amplifier 4ohm/8ohm/70V/100V, 8 inputs For Commercial and Industrial Use 40W into 8 or 4 Ohm Loads 5W Per Channel 8 Input Channels, 2 Output Channel Usable with 70 & 100V Systems Euroblock Mic/Line & RCA Inputs Specifications: Maximum Output Power: 40 W per channel into 4 Ohms or 8 Ohms, 1 kHz, = 0.5% THD Insertion Loss: 1 dB maximum for 70 and 100 V outputs Continuous Power: 5 W per channel Line Output Level: 5.0 V RMS into 10 kOhms Input Sensitivity: To obtain full rated power at 8 Ohms (or 5 VRMS to line output). Mic Input: 3 mV RMS. Line Input: 775 mV RMS. RCA Input: 300 mV RMS Number of Channels: Input: 8, Output: 2. Signal to Noise Ratio: > 90 dB Nominal Input Impedance: Mic: 400 Ohms. Line: 20 kOhms (balanced). RCA: 50 kOhms. Minimum Load Impedance: Low Impedance Output: 4 Ohms. 70 V Output: 120 Ohms. 100 V Output: 240 Ohms. Crosstalk: -70 dB @ 1 kHz Controls: Front Panel: 8 x Input level rotary knobs 2 x Output volume-attenuating knobs 2 x Vox adjustment switches 1 x Power switch 2 x Bass potentiometers 2 x Treble potentiometers Rear Panel: Indicators: Front Panel: 8 x Mic/Line selector switch 8 x Input signal presence ring, gree 2 x Output volume ring, green 1 x Power switch ring, green/blue Connectors: Rear Panel: 1 x IEC power input 2 x Aux out connection points 6 x 3-pin euroblock connectors 2 x 5-pin euroblock connectors 6 x Dual RCA input connectors Features: (4) JBL 8128 8"" Full Range 70V/100V 6 Watt Commercial Ceiling Speakers for Restaurant/Bar/Cafe Component: 8"" Full-Range Driver Frequency Range: 50 Hz – 16 kHz Sensitivity: 97 dB Coverage: 90° Conical 70V/100V Taps: 6W, 3W, 1.5W (0.75W at 70V only) Termination: Bare Wires Clear, High-Fidelity Performance Dog-ears for easy Blind Mount Installations High Sensitivity (93 dB, 1W, 1m) for Maximum Power Efficiency 6W Transformer for use of 70V / 100V Distributed Lines

Package Includes: (1) JBL CSMA240 Commercial/Restaurant 2 x 40w Amplifier 4ohm/8ohm/70V/100V, 8 inputs. (2) Pairs of JBL 8128 8" Full Range Commercial 70V/100V 6w Ceiling Speakers 4 Restaurant. (2) JBL CSR-V Black Wall Volume Controller For Select CSM/CSMA/VMA Mixer Amplifiers. Features: JBL CSMA240 Commercial/Restaurant 2 x 40w Amplifier 4ohm/8ohm/70V/100V, 8 inputs. For Commercial and Industrial Use. 40W into 8 or 4 Ohm Loads. 5W Per Channel. 8 Input Channels, 2 Output Channel Usable with 70 & 100V Systems. Euroblock Mic/Line & RCA Inputs. Hi-Z & 27V Phantom Power Switches. Sleep Mode & 2 Auxiliary Outputs. Voice Activated Ducking & Priority Mute. Specifications: Maximum Output Power:40 W per channel into 4 Ohms or 8 Ohms, 1 kHz, ? 0.5% THD. Insertion Loss:1 dB maximum for 70 and 100 V outputs. Continuous Power: 5 W per channel. Line Output Level: 5.0 V RMS into 10 kOhms Input Sensitivity: To obtain full rated power at 8 Ohms (or 5 VRMS to line output). Mic Input: 3 mV RMS. Line Input: 775 mV RMS. RCA Input: 300 mV RMS. Number of Channels: Input: 8, Output: 2.. Frequency Response: Measured at 2.83 V RMS into rated load impedance at any output. 4/8 Ohms Output: 20 Hz - 20 kHz, 2 dB. 70 V/100 V Outputs: 80 Hz - 15 kHz 2 dB. Line Out: 20 Hz - 20 kHz, 1 dB Total Harmonic Distortion (THD): Measured at 2.83 V RMS into rated load impedance at any output. Power Amplifier Output: <0.5%, 20 Hz to 20 kHz. Line Output: 0.05% typical. Signal to Noise Ratio: > 90 dB. Nominal Input Impedance: Mic: 400 Ohms. Line: 20 kOhms (balanced). RCA: 50 kOhms.. Minimum Load Impedance: Low Impedance Output: 4 Ohms. 70 V Output: 120 Ohms. 100 V Output: 240 Ohms.. Crosstalk: -70 dB @ 1 kHz. Controls: Front Panel: 8 x Input level rotary knobs 2 x Output volume-attenuating knobs. 2 x Vox adjustment switches. 1 x Power switch. 2 x Bass potentiometers. 2 x Treble potentiometers. Rear Panel: 2 x Input-routing dip switches (including phantom and Hi-Z switches). Indicators: Front Panel: 8 x Mic/Line selector switch. 8 x Input signal presence ring, gree. 2 x Output volume ring, green. 1 x Power switch ring, green/blue. Connectors: Rear Panel: 1 x IEC power input. 2 x Aux out connection points. 6 x 3-pin euroblock connectors