JBL CSMA240 Commercial/Restaurant 2 x 40w Amplifier+White Wall Volume Controller

Package Includes: (1) JBL CSMA240 Commercial/Restaurant 2 x 40w Amplifier 4ohm/8ohm/70V/100V, 8 inputs(1) JBL CSR-V White Wall Volume Controller For Select CSM/CSMA/VMA Mixer Amplifiers Description of CSMA240: Designed for commercial and industrial use, the CSMA 240 Commercial Series Mixer/Amplifier from JBL is a mixer/amplifier with eight mixer-channel inputs and two output channels. It's capable of reaching 40W of peak power with 5W per channel. The amplifier, capable of driving both eight and four Ohm loads, can be used with 70V and 100V distributed audio systems without the need for a separate transformer. On its back panel you'll find euroblock connections for mic/line inputs, as well as unbalanced RCA inputs, speaker connections, dip switches for input routing, and more. This Commercial Series mixer/amplifier boasts such features as voice activating ducking (useful for paging over background music), priority muting for channels one and five, and a sleep mode which automatically powers down the unit when no audible signal has been received for longer than 30 minutes. Channel Modes 8 inputs with 2 outputs of 40W of power. Controls Independent Bass and Treble controls for each output channel. Input level and output volume controls. Phantom PowerPhantom power (27 V) can be applied to all mic inputs by turning on Phantom Power within the dip switches. Features of CSMA240: JBL CSMA240 Commercial/Restaurant 2 x 40w Amplifier 4ohm/8ohm/70V/100V, 8 inputsFor Commercial and Industrial Use40W into 8 or 4 Ohm Loads5W Per Channel8 Input Channels, 2 Output ChannelUsable with 70 & 100V SystemsEuroblock Mic/Line & RCA InputsHi-Z & 27V Phantom Power SwitchesSleep Mode & 2 Auxiliary OutputsVoice Activated Ducking & Priority Mute Specifications of CSMA240 : Maximum Output Power: 40 W per channel into 4 Ohms or 8 Ohms, 1 kHz, = 0.5% THD Insertion Loss: 1 dB maximum for 70 and 100 V outputs Continuous Power: 5 W per channel Line Output Level: 5.0 V RMS into 10 kOhms Input Sensitivity: To obtain full rated power at 8 Ohms (or 5 VRMS to line output). Mic Input: 3 mV RMS. Line Input: 775 mV RMS. RCA Input: 300 mV RMS Number of Channels: Input: 8, Output: 2. Signal to Noise Ratio: > 90 dB Nominal Input Impedance: Mic: 400 Ohms. Line: 20 kOhms (balanced). RCA: 50 kOhms. Minimum Load Impedance: Low Impedance Output: 4 Ohms. 70 V Output: 120 Ohms. 100 V Output: 240 Ohms. Crosstalk: -70 dB @ 1 kHz Controls: Front Panel:8 x Input level rotary knobs2 x Output volume-attenuating knobs2 x Vox adjustment switches1 x Power switch2 x Bass potentiometers2 x Treble potentiometersRear Panel: 2 x Input-routing dip switches (including phantom and Hi-Z switches) Indicators:Front Panel:8 x Mic/Line selector switch8 x Input signal presence ring, gree2 x Output volume ring, green1 x Power switch ring, green/blueConnectors:Rear Panel:1 x IEC power input

JBL CSMA240 Commercial/Restaurant 2 x 40w Amplifier+White Wall Volume Controller