JBL CSMA280 Commercial Amplifier+(4) 6.5" White Wall Speakers+Wall Controller

Package Includes: (1) JBL CSMA280 Commercial/Restaurant 2 x 80w Amplifier 4ohm/8ohm/70V/100V, 8 inputs (2) Pair of JBL Control 25-1 5.25" 30w 70v Wall-Mount Commercial Restaurant/Bar Speakers (1) JBL CSR-V White Wall Volume Controller For Select CSM/CSMA/VMA Mixer Amplifiers Features of CSMA280: JBL CSMA280 Commercial/Restaurant 2 x 80w Amplifier 4ohm/8ohm/70V/100V and 8 inputs For Commercial and Industrial Use 80W into 8 or 4 Ohm Loads 10W Per Channel 8 Input Channels, 2 Output Channel Usable with 70 & 100V Systems Euroblock Mic/Line & RCA Inputs Hi-Z & 27V Phantom Power Switches Sleep Mode & 2 Auxiliary Outputs Voice Activated Ducking & Priority Mute Specifications of CSMA280: Maximum Output Power: 800 W per channel into 4 Ohms or 8 Ohms, 1 kHz, = 0.5% THD Insertion Loss: 1 dB maximum for 70 and 100 V outputs Continuous Power: 10 W per channel Line Output Level: 5.0 V RMS into 10 kOhms Input Sensitivity: To obtain full rated power at 8 Ohms (or 5 VRMS to line output). Mic Input: 3 mV RMS. Line Input: 775 mV RMS. RCA Input: 300 mV RMS Number of Channels: Input: 8, Output: 2. Frequency Response: Measured at 2.83 V RMS into rated load impedance at any output. 4/8 Ohms Output: 20 Hz - 20 kHz, ±2 dB. 70 V/100 V Outputs: 80 Hz - 15 kHz ±2 dB. Line Out: 20 Hz - 20 kHz, ±1 dB Total Harmonic Distortion (THD): Measured at 2.83 V RMS into rated load impedance at any output. Power Amplifier Output: <0.5%, 20 Hz to 20 kHz. Line Output: 0.05% typical Signal to Noise Ratio: > 90 dB Nominal Input Impedance: Mic: 400 Ohms. Line: 20 kOhms (balanced). RCA: 50 kOhms. Minimum Load Impedance: Low Impedance Output: 4 Ohms. 70 V Output: 120 Ohms. 100 V Output: 240 Ohms. Crosstalk: -70 dB @ 1 kHz Features of Control 25-1: 2 JBL Control 25-1 5.25" 100w White Surface-Mount Speakers 4 Home/Restaurant/Bar 5.25" Woven-Fiberglass LF Drivers 0.75" PEI Diaphragm Tweeters 200W RMS at 8 Ohms Durable, Weatherized Enclosures InvisiBall Mounting Hardware Zinc-Plated Grilles Good for Off-Axis Listening 60 Hz to 20 kHz Frequency Response Specifications of Control 25-1: Power Rating: 200 W continuous program (2 h). 100 W (400 W peak), continuous pink noise (2 h). 75 W (300 W peak) continuous pink noise (100 h) Nominal Impedance: 8 ohms (THRU setting) Maximum Input Voltage: 25.3 V RMS (2 h), 50.6 V peak Frequency Response± 3dB: 85 Hz to 17 kHz Frequency Response ±10 dB: 60 Hz to 20 kHz Sensitivity: 90 dB, 1 W / 1 m (average 100 Hz to 10 k Hz) Coverage Angle: 100° x 100° Directivity Factor: 6.0 (averaged 1 kHz to 16 kHz) Directivity Index: 7.6 dB (averaged 1 kHz to 16 kHz) Crossover Type: 2nd order low-pass, 2nd

JBL CSMA280 Commercial Amplifier+(4) 6.5" White Wall Speakers+Wall Controller