JBL VMA1120 Commercial 70v Amplifier+(6) Black Dual 4" Speakers For Restaurant

Package Includes: (1) JBL VMA1120 Commercial/Restaurant 120W 70v Bluetooth Mixer/Amplifier, 5 Inputs(6) Rockville WET-D4 Black Dual 4" Indoor/Outdoor Commercial/Restaurant 70V Speaker Features of VMA1120: JBL VMA1120 Commercial/Restaurant 120 Watt Bluetooth Mixer/Amplifier with 5 Inputs 5-Input Mixer Supports USB Drives and Bluetooth 120W, 1-Output Amplifier Euroblock, RCA, and 1/4" Inputs Euroblock Outputs Per-Channel Bass and Treble Controls Voice-Activated Ducking Front-Panel Display and Controls Configurable Output Routing Includes Rack Mount Kit Specifications of VMA1120: Output Power Per Channel: 120 Watts into 4 Ohms or 8 Ohms Insertion Loss: 70 V and 100 V Outputs: 1 dB Max. Input Channels: 5 Output Channels: 1 Tone Control: Bass and Treble non-detented potentiometers on each channel Bass: ±14 dB @ 50 Hz Treble: ±14 dB @ 10 kHz Input Sensitivity: Mic Input: 5.5 mVrms Line Input: 1.3 Vrms RCA Input (Stereo In): 130 mVrms Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output 4/8 Ohms Output: 20 Hz to 20 kHz, ±2 dB 70 V/100 V Outputs: 80 Hz to 15 kHz ±3 dB Total Harmonic Distortion (THD): Power Amp Output: <0.5%, 20 Hz to 20 kHz Signal to Noise Ratio: >76 dB Input Impedance: Mic: 400 Ohms Line: 20k Ohms RCA: 50k Ohms Phantom Power: 27 VDC Crosstalk: -70 dB Nominal Input Voltages: Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz Minimum Load Impedance: Low Impedance Output: 4 Ohms 70 V Output: 40 Ohms 100 V Output: 80 Ohms Operating Temperature: 32°F to 95°F Humidity: 95% RH Storage Temperature: -4°F to 185°F Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches Product Weight: 20.2 Lbs. Features of WET-D4 BLACK: Rockville WET-D4 Dual 4" Indoor/Outdoor Commercial/Restaurant 70V or 8 Ohm Speaker in black Dual 4" Woofers with Polypropylene cones angled for perfect sound dispersion 1” Kapton Voice Coil 9.75 oz. Ferrite Magnet 1” silk dome tweeter is very efficient and has great sound Includes Wall Mounting Hardware IP55 rating makes this perfect for outdoor use or indoor use IP55 means this can withstand jet streams spraying it from any angle without any damage Rugged waterproof ABS cabinet Built in 12dB/Octave crossover with dynamic speaker protector Crossover details: 2nd order / 2500Hz rolloff 8 Ohm imped

Package Includes: (1) JBL VMA1120 Commercial/Restaurant 120W 70v Bluetooth Mixer/Amplifier, 5 Inputs. (6) Rockville WET-D4 Black Dual 4" Indoor/Outdoor Commercial/Restaurant 70V Speaker Features of VMA1120: JBL VMA1120 Commercial/Restaurant 120 Watt Bluetooth Mixer/Amplifier with 5 Inputs. 5-Input Mixer. Supports USB Drives and Bluetooth. 120W, 1-Output Amplifier. Euroblock, RCA, and 1/4" Inputs. Euroblock Outputs. Per-Channel Bass and Treble Controls. Voice-Activated Ducking. Front-Panel Display and Controls. Configurable Output Routing. Includes Rack Mount Kit. Specifications:. . Output Power Per Channel: 120 Watts into 4 Ohms or 8 Ohms. Insertion Loss: 70 V and 100 V Outputs: 1 dB Max.. Input Channels: 5. Output Channels: 1. Tone Control: Bass and Treble non-detented potentiometers on each channel. Bass: ±14 dB @ 50 Hz. Treble: ±14 dB @ 10 kHz. Input Sensitivity:. Mic Input: 5.5 mVrms. Line Input: 1.3 Vrms. RCA Input (Stereo In): 130 mVrms. Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output. 4/8 Ohms Output: 20 Hz to 20 kHz, ±2 dB. 70 V/100 V Outputs: 80 Hz to 15 kHz ±3 dB. Features of VMA1120: JBL VMA1120 Commercial/Restaurant 120 Watt Bluetooth Mixer/Amplifier with 5 Inputs. 5-Input Mixer. Supports USB Drives and Bluetooth. 120W, 1-Output Amplifier. Euroblock, RCA, and 1/4" Inputs. Euroblock Outputs. Per-Channel Bass and Treble Controls. Voice-Activated Ducking. Front-Panel Display and Controls. Configurable Output Routing. Includes Rack Mount Kit. Specifications:. . Output Power Per Channel: 120 Watts into 4 Ohms or 8 Ohms. Insertion Loss: 70 V and 100 V Outputs: 1 dB Max.. Input Channels: 5. Output Channels: 1. Tone Control: Bass and Treble non-detented potentiometers on each channel. Bass: ±14 dB @ 50 Hz. Treble: ±14 dB @ 10 kHz. Input Sensitivity:. Mic Input: 5.5 mVrms. Line Input: 1.3 Vrms. RCA Input (Stereo In): 130 mVrms. Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output. 4/8 Ohms Output: 20 Hz to 20 kHz, ±2 dB. 70 V/100 V Outputs: 80 Hz to 15 kHz ±3 dB.