JBL VRX932LA-1WH 12" 800 Watt 2-Way Passive Line-Array Speaker in White

Description: The VRX932LA-1WH is a light-weight (46 lb / 21 kg) compact 12" two-way line array speaker system designed for use in arrays of up to six units. VRX932LA-1WH is painted JBL’s white Duraflex™ making it appropriate for many houses-of-worship, auditoriums or theaters where the existing décor demands an alternative to a black loudspeaker system. The VRX932LA-1WH is optimized for permanent installation with no handles or pole mount attached. VRX932LA-1WH is the ideal choice when line array performance is needed but the venue size doesn’t call for the very long-throw characteristics of larger line arrays such as JBL’s VERTEC®. The Constant Curvature waveguide mounts three compression drivers on a continuous arc. When additional VRX932LA-1WH speakers are added to the array the uninterrupted arc continues. In effect, all the drivers work together as if they were a single driver on a very long waveguide. Since there are three drivers in each VRX932LA-1WH, the combined power handling and acoustic output of the system is far greater than a single driver could achieve. VRX932LA-1WH uses “amplitude shading” to shape the coverage of the array. Switches on the input plate allow, for example, the upper box in an array to reach a distant balcony while the lower HF section is shaded back to reduce excessive level at the front of the listening area. As many as six VRX932LA-1WH speaker systems may be suspended in a single array for a nominal vertical coverage of up to 90°. Suspended applications require the JBL VRX-AF array frame (available separately). For applications in which the array must be aimed sharply down, a second array frame may be installed to the bottom of the array serving as a pull-back. The VRX932LA-1WH was designed for compatibility with VRX918S-WH subwoofers. Features: JBL’s white Duraflex™ finish JBL’s exclusive neodymium magnet Differential Drive® woofer for high power capacity and light-weight. Three neodymium, Annular Ring Diaphragm drivers for high power capacity and high-frequency extension. Constant Curvature waveguide for unprecedented array coherence. Integral rigging hardware for simple connection of enclosures and optional array frame. Arrays of up to six enclosures may be flown. Array Configuration Selector permits “array shading” in passive mode. Specifications: Power Rating: 800 W / 1600 W / 3200 W Frequency Range (-10dB): 57 Hz - 20 kHz Dimensions (H x W x D): 349mm x 597mm x 381mm (13.75in x 23.5in x 15.0in) Frequency Response (±3 dB): 75 Hz - 20 kHz Coverage Pattern: 100 x 15 nominal Crossover Modes: Bi-amp / passive, externally switchable Crossover Frequency: 132 dB SPL peak 1.2 kHz Maximum SPL (1m): 130 dB SPL peak (passive mode), LF: 130 dB HF: 139 dB Sensitivity: Passive: 95 dB SPL Bi-amp LF: 95 dB SPL Bi-amp HF: 114 dB SPL LF Driver: 1 x JBL 2262H 305 mm (12 in) Differential Drive® woofer with neodymium magnet, dual voice-coils, and dual magnetic gaps. HF Driver: 3 x JBL 2408J, 38 mm (1.5 in) voice-coil, neodymium compression driver Nominal Impedance: Passive = 8 ohm, Bi-amp LF = 8 ohm , Bi-amp HF = 8 ohm Active Tunings: Tunings available at www.jblpro.com Enclosure: 18 mm, 11-ply birch plywood Suspension

Ideal for mid-sized venues!