Microphone and 6" Microphone Pop Filter Wind Screen with Arm Stand

Description: The microphone set includes Condenser Microphone BM-800, Pop Filter Wind Screen and Scissor Arm Stand. This microphone with a good cardioids polar pickup pattern, high output, low self-noise, suitable especially for studios, recording studios, broadcasting stations, adage performances and computer.Ideal as main and support microphone for studio and live applications Features (microphone): -Tailored frequency response provides vocal intelligibility and crispness -Neodymiun magnet for high signal-to-noise ratio -Shock Mount to reduces handling noise -Cardiod(undirectional) pickup pattern supresses feedback -Polar Pattern: Uni-directional -Frequency Response: 20Hz-20kHz -Sensitivity: 45dB1dB -Output Impedance:150030%(at 1kHz) -Load impedance: 1000 -Equivalent Noise level: 16dBA -Electrical current: 3mA -Microphone output interface: 3.5mm -Use of voltage: 48V phantom power supply -Wire: 3.5 inserted audio interface, 3 meter long -Microphone body weight: 230g -Size: Approx. 16 x 5 x 5cm/6.3 x 1.97 x 1.97inch Features (Pop Filter): -External diameter:155mm - Ideal Product To Reduce P-pops In Recording - Compatible with Personal Studio, Recording, Video Chat, Broadcasting And Radio Hosting - Double-layer net diameter: 130mm - Tube length: 375mm - Tube diameter: 8mm - Mounting clamp can clip up to 35mm(clamp adjustable) - 360 Degree Swivel Mount Flexible Holder can be Arbitrarily Distorted Features (Scissor Arm Stand): - Can be mounted on the announcers desk with the metal mounting base - The XLR male to female microphone cable is already installed hidden inside the boom arm tubing enhancing the scissor suspension microphone stands overall appearance. - Steel Construction: (9mm*9mm cross-section) - The Arm Stand can support up to 2KG - The standard microphone clamp can hold the microphone diameter about 27mm.(for the large diaphragm condenser microphone, you need to buy an extra Shock Mount to replace the clamp) - Weight of arm stand: 850g - Each arm measures: 36cm(14.1 inches) Features: (Mic Shock Mount) - Features an angle adjustment with locking knob - Foam insert to hold and protect microphone Application: 1.Turn on your amplifier or mixing board and set the volume control to minimum position. Connect the phantom power to the microphone, turn on the phantom switch ,accommodate the volume control from low to high to obtain effect to your moderate level to protect the sauna from pounding. 2.If the head of the microphone is covered by hand or brought close to the speaker ,a howling sound may be generated to prevent this, first decrease the volume, then place the microphone so that it is not pointed to the speaker and that this is a sufficient distance between the microphone and speaker. 3.The sensitivity of cartridge is very fine ,do not drop, hit or apply strong shock to it. 4.Maintain the sensitivity and quality of sound reproduction, avoid exposing it to moisture and extreme temperatures Package Included: -1x Black Microphone -1xShock Mount -1x Power Cord -1x Anti-wind foam cap -1x User Manual -1x Pop Filter Wind Screen -1xArm Stand body -1x Clip for standard Dynamic Microphone, etc. -1x Mounting base(for desktop or other boards) -1x Screw nut -1x XLR Male to XLR Female cable( already installed hidden inside the boom arm tubing)

Convenient to Install and Use Universal MIC Stand Mounting Bracket Ideal Product To Reduce P-pops In Recording Features an angle adjustment with locking knob Foam insert to hold and protect microphone