Pet Heating Pad Adjustable Incubator for Reptile Temperature Control

Description: This is a perfect heating pad with temperature control, very practical. Specification: Model: A section B section Power: A: 28W B: 50W Size: A: about 28*15 B: about 28*28 Weight: A: about 132g B: about165g Voltage: 110-220V Packing list: 1*Climbing Pet Heating Pad Notes: 1.Due to the difference in camera equipment, light intensity and display screen, the color of the item may be slightly different from the picture. 2.Due to manual measurement, please allow a difference of 0.1-2cm.

Upgrade Design: Real-time control. The constant temperature value is proportional to the ambient temperature.If LLL is displayed, it is a low temperature warning. If Err is displayed, it means that the equipment has malfunctioned and the equipment has stopped heating. Please check the equipment in time and replace the waiting equipment. Uniform Heating: The heating pad is equipped with a new heating foil and insulating material. Increase the overall heat transfer uniformity across the entire mat. The temperature setting range is 20°C-50°C. The factory preset temperature is 32°C. The required temperature is reached within a few minutes. Specifications: 28W.50W. Easy to Use: The pad can be used under a water tank or animal breeding box. Or put it in a water tank with a layer of sand/bark debris. To be safe, it is best to put something thin in the middle so that the temperature will not be lost. For Low Water Tanks: Heating pads are suitable for climbing pet water tanks of different materials. The heating pad is placed at the bottom, and the maximum water level of the pet water tank must not exceed 5 cm to ensure safe heating, otherwise the heating effect will be weak. When heating, the climbing pet tank at the open end quickly evaporates, and the tank mouth can be covered and reheated accordingly. For Most Reptiles: Suitable for turtles,lizards, geckos, mall mammals, reptiles and all animals that require abdominal heat