Teke FPV Racing Drone Happymodel Mobula6 1S 65mm Brushless With 4in1 Crazybee F4 Lite Runcam Nano3 Preorder Drone 5.8G VTX

Features:1. Support Betaflight tuning, multiple flight modes.2. Integrated injection molding Tiny Whoop structure.3. The highly integrated motherboard integrates OSD, Dshot ESC, 2.4G SPI receiver, 5.8g 25mw 40CH VTX.4. Integrate Betaflight OSD function, keep abreast of the flight voltage and receiver signal, and fly more calmly.5. VTX comes with Smartaudio function, you can adjust the flight control parameters through the OSD, adjust the flight control PID, and adjust the VTX frequency point parameters.Description:Completely assembled and debugged, you can fly with the remote control when you get it, and the camera's pitch angle is adjustable.Specifications:Brand: HappymodelModel: Mobula6Crazybee F4 LiteFlight Controller:(Type 1 SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR(Type 2 SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FSMCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000(SPI connection)Board size: 28.5 * 28.5MMPower supply: 1S battery input (DC 2.9V-4.35V)Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 readyBuilt-in Betaflight OSD(SPI Control)Built-in 5.8G VTXBuilt-in SPI Frsky/Flysky receiverBuilt-in 5V 1A BECBuilt-in voltage detectionOnboard Type 1 Receiver Version:SPI BUS receiver Frsky D8 compatibleCompatible Non EU transmitter D8 model- Support EU LBT Radio TransmitterChannels: 8chFailsafe supportNo ground interference ( Transmitter and receiver 1 m from the ground): 100m~200mOnboard Type 2 Receiver VersionSPI BUS receiver Frsky D8 compatibleCompatible Non EU transmitter D8 model- Support EU LBT Radio TransmitterChannels: 8chFailsafe supportNo ground interference ( Transmitter and receiver 1 m from the ground): 100m~200mOnboard 5A BLheli_S 4 in1 ESC:Model: SE0802KV: 19000KV / 25000KV MotorConfigu-ration:9N12PStator Diamter:8mmStator Length:2mmShaft Diameter:Φ1mmMotor Dimension(Dia.*Len):Φ10.5mm*14.9mmWeight(g):1.9gNo.of Cells(Lipo):1S onlyGemfan 1219 3-Blade Propeller:Center Thickness:5mmProp Disk Diameter:31mmCenter Hole Inner diameter:1.0mmQuantity: 4 CW & 4 CCWWeight:0.28gOnboard 5.8G 40CH 25mW VTX:Output power: 25mwFrequency: 40CHInput voltage: 3.3V 5.5VCurrent consumption: 300mA(type)Frequency: 5.8GHz 5bands 40 channelsWith Race bandSmartaudio readyRuncam Nano 3 FPV Camera:Brand Name: RuncamModel: Nano 3Item Name: 1/3 CMOS 800TVL CameraElectronic Shutter Speed: AutoAuto Gain Control (AGC): AutoMin. Illumination: 0.01Lux@1.2FD-WDR: AutoDay/Night: ColorPower:DC 3-5.5VCurrent: 110mA@5V120mA@3.3VHousing Material: ABSFOV: 120 degreeDimensions: 14*14*9mm （L*W*H）Lipo Battery (Included):Continuous Discharge Rate: 30CSize: 57*12*7mmWeight: 8gConnector: PH2.0Quantity: 4 PCSPackage Included:1 * Mobula6 1S 65mm racing drone (built in battery)1 * Crazybee F4 Lite flight control4 * SE0802 KV190008 * Gemfan 1219 three-blade propeller (4cw + 4ccw)1 * Runcam Nano3 1/3 CMOS 800TVL1 * 5.8G 25mw 40ch vtx4 * 1S 300mah 30C LiHV battery1 * 1S Lipo / LIHV USB charger1 * Propeller removerNotes:1. Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from real object.

Teke FPV Racing Drone Happymodel Mobula6 1S 65mm Brushless With 4in1 Crazybee F4 Lite Runcam Nano3 Preorder Drone 5.8G VTX