Zigbee 3.0 Smart Life Zigbee 3.0 Tuya Tuya Smart Life

Description: TUYA ZigBee gateway is required. 1.【Customize/ Button Actions.】 Smart knob, match the smart scene, open the smart scene with one key. You dont need to click the scene mode on the phone, just click the smart knob to open the smart scene. For example, movie mode: turn on the TV, turn off the lights in the living room, close the curtains, turn on the TV ambient light, and turn on the sound. Click the smart knob to do it. 2.【 Trigger routines to occur.】 Five different opening modes of the smart knob. Single Press, Double Press, Long Press, Rotate Press and Rotate. Five scenarios can be set, one to meet multiple needs is indispensable for you! 3.【Can control any smart device (Powered by TUYA)】 Control lights, electronics and small appliances from anywhere. 4. 【Ultra-low Energy, powered by battery.】 The battery can be used for a long time, so there is no need to replace the battery frequently. No need to wire in. 5.【 Without installation.】It can also be placed on the table, pasted on the wall, anywhere within reach! Specifications: Product name：Smart Knob Battery：CR2032 3V DC Communication：Zigbee 3.0 Working Range：50m Open Area Working Temperature：-10°C-45°C Working Humidity：

Note: Tuya ZigBee Hub needs to be purchased separately (search for B09LM644XJ or B091BRGMTZ in AMZ), it is a bridge for all ZigBee smart devices under Tuya Smart APP to be used normally. DIMMER SWITCH WIRELESS SCENE SWITCH: Wireless control of ZigBee dimmer lights in remote control mode (only ZigBee lights can be added for control). In scene mode, create multiple smart scenes for Tuya smart devices in the app. REMOTE CONTROL MODE: There are four operations in remote control mode to meet different needs: single press to turn on/off the bulb, rotate to normal dimming, long press to rotate to set color temperature, long press for more than 3 seconds to set color. SCENE MODE: Create any smart automation you want on your smartphone app, start your another smart lifestyle, no more voice commands, no more time to open your app, just simple Actions trigger the scene you set. SMALL AND SIMPLE INSTALLATION: Remove the screw, pull out the battery insulation tab, fit the cover and press and hold "RESET" for 6s until the LED starts blinking to enter pairing mode.