The Best Emergency Response Equipment 2025

1. Guardian Equipment Eye Wash Fountain G1814

In the event of accidental chemical splash, your health and safety depend upon how quickly you can be treated. These systems provide immediate and effective first aid treatment required. All models come with a ANZI compliant identification sign and meet ANZIStandard Z358.1-1998 specifications Units have two GS-Plus spray heads to deliver water in a soft, widespray rather than a solid, narrow stream. The user receives more water over a wider area. Spray heads have "flip top" dust cover, internal flowcontrol and filter to remove impurities from water flow. 1/2" IPS stayopen ball valve permits "hands free" operation. Stainless Steel., Lot of 1

Two GS-Plus™ spray-type spray heads deliver a flood of water for rinsing eyes Heavy duty cast aluminum wall bracket with corrosion resistant powder coated finish ANSI-compliant identification sign 1/2" IPS chrome plated brass stay-open ball valve

2. Optics Laboratory Optics OcuFresh Eye Wash, 6 ea

Eye Wash 6 - 20 ml doses The only preservative-free eye wash. For every day use or urgent care. 6 sterile, single-use dose. The safe choice for cleaning and relieving your eyes. Sterile eye cup included. Washes away irritants. Removes chlorinated water. Relieve burning, itching, stinging eyes. Removes pollen and loose foreign material from eyes. Safe for all ages. 6 sterile go-anywhere, single-use tubes. Made in Taiwan. For flushing eye to help relieve irritation, discomfort, burning, stinging, smarting or itching by removing these loose foreign material, air pollutants (smog or pollen) or chlorinated water. Do not dilute solution or reuse bottle. Without Cup: Hold container a few inches above the eye; Control rate of flow by pressure on bottle; Flush affected area for a minimum of 20 minutes; Continue flushing with water if necessary; Obtain medical treatment. With Cup: Rinse cup with clean water immediately before each use (Avoid contamination of rim and inside surface of cup); Fill cup with half full and apply the cup to the affected eye, pressing tightly to prevent the escape of the liquid, and tilt the head backward; Open eyelids wide and rotate eyeball to ensure through bathing with the wash; Rinse cup with clean water after each use. Store at room temperature 59-86 degrees F (15-3 degrees C). To avoid contamination, do not touch tip of the vial to any surface. Do not reuse. Once opened, discard. If you experience eye pain, changes in vision, continued redness or irritation of the eye, or if the condition worsens or persists, consult a doctor. Obtain immediate medical treatment for all open wounds in or near the eyes. If solution changes colors or becomes cloudy, do not use. 6 - 20 ml doses El Monte, CA 91731 800-968-6788 Optics Laboratory, Inc.

Eye Wash The only preservative-free eye wash. For every day use or urgent care. 6 sterile, single-use dose. The safe choice for cleaning and relieving your eyes. Sterile eye cup included. Washes away irritants. Removes chlorinated water. Relieve burning, itching, stinging eyes. Removes pollen and loose foreign material from eyes. Safe for all ages. 6 sterile go-anywhere, single-use tubes. Made in Taiwan.

3. Guardian AquaGuard Gravity-Flow Portable Eyewash, 16gal -GUAG1540

Self-contained, portable eyewash station uses the power of gravity to ensure thorough cleansing. Ideal for remote, low-traffic plant areas or where a continuous supply of potable water is not available. Integral dual spray heads deliver a soft spray of water for a full 15 minutes at a rate of .5 gallons a minute. Swing tray up to storage position to stop flow. Rugged plastic tank with epoxy-coated steel bracket can be installed in a variety of locations. Mounting: Wall; Counter; Flow Rate @ Pressure: 0.7 GPM; Depth: 20"; Height: 20 1/2". Compliance Standards: ANSI Z358.1-2009 Compliant. Warranty: Manufacturer's limited two-year warranty. Post-Consumer Recycled Content Percent: 0%. Pre-Consumer Recycled Content Percent: 0%.

Self-contained gravity flow eyewash station. Dual spray heads. Delivers 15 minutes of spray. Swing tray up to storage position to stop flow. Rugged plastic tank. Ideal for low-traffic areas. Model Number: G1540

4. Guardian Equipment Body Wash Drench Shower G1635

IN THE EVENT OF ACCIDENTAL CHEMICAL SPLASH YOUR SAFETY AND HEALTH DEPEND UPON HOW QUICKLY YOU CAN BE TREATED. THESE SYSTEMS PROVIDE IMMEDIATE AND EFFECTIVE FIRST AID TREATMENT REQUIRED. ALL MODELS COME WITH A ANZI COMPLIANT IDENTIFICATION SIGN AND MEET ANZI STANDARD Z358.1-1998 SPECIFICATIONS. DRENCH SHOWER 10"" HIGH VOLUME ORANGE ABS PLASTIC SHOWERHEAD DELIVERS 30 GPM FLOW AND 20"" SPRAY PATTERN AT 60"" ABOVE THE FLOOR. LARGE SIZE PULL ROD IS EASILY LOCATED. STAY OPEN BALL VALVE PERMITS HANDS FREE OPERATION. ACTIVATES IN ONE SECOND OR LESS. CEILING MOUNT PLUMBING REQUIRED. WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov -

10” diameter shower head is orange ABS plastic ANSI-compliant identification sign 1” IPS chrome plated brass stay-open ball valve, furnished with stainless steel actuating arm and 29” stainless steel pull rod

5. Guardian Equipment Body Wash Drench Shower , G1643, 10"H

In the event of accidental chemical splash, your safety and health depend upon how quickly you can be treated. These systems provide immediate and effective first aid treatment required. All models come with a ANZI compliant identification sign and meet ANZI Standard Z358.1-1998 specifications. DRENCH SHOWER 10" high volume orange ABS plastic showerhead, Wall Mount, delivers 30 GPM flow and 20" spray pattern at 60" above the floor. Large size pull rod is easily located. Stay open ball valve permits hands free operation. Activates in one second or less., Lot of 1

Made of plastic,,Package Dimensions : 5.0 L x 31.0 H x 11.0 W (inches),Package Weight : 7.0 pounds

6. Wall Mounted Eye/Face Washes, 11 1/2 in, Safety Orange, 2 Head

1/2” IPS chrome plated brass stay-open ball valve Heavy duty cast aluminum wall bracket with corrosion resistant powder coated finish

1/2” IPS chrome plated brass stay-open ball valve Heavy duty cast aluminum wall bracket with corrosion resistant powder coated finish

7. Guardian Equipment G1805 Eye/Face Wash Deck Mounted AutoFlow 90 Degree Right Hand Mounting

DECK MOUNTED EYE WASH INSTALLS NEXT TO YOUR SINK AND SWINGS OUT OF THE WAY WHEN NOT IN USE. NEVER LOSE DUST COVERS AGAIN SPRAY HEAD ASSEMBLY HAS TWO GENTLE SPRAY OUTLET HEADS WITH ""FLIP-TOP"" DUST COVERS MOUNTED ON CHROME PLATED BRASS SUPPLY ARMS. EYE WASH ACTIVATES UPON SWINGING COUNTER-CLOCKWISE OVER SINK. UNIT MEETS ANSI Z358.1 STANDARD AS PRIMARY EYE WASH. FULLY WATER TESTED AND FACTORY ASSEMBLED. COMPLETE WITH ANSI COMPLIANT IDENTIFICATION SIGN. WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov -

Guardian Equipment G1805 Eye/Face Wash Deck Mounted AutoFlow 90 Degree Right Hand Mounting

8. Speakman SE-4320 Gravityflo High Vis Blue Plastic Portable Eye Wash

Speakman SE-4320 Gravityflo High Vis Blue Plastic Portable Eye Wash

Durable

9. T And S Brass Ew-7612 Countertop Mounted Eye And Face Wash

T and S Brass EW-7612 Features: Covered under T and S Brass' 1 year limited warranty Constructed of brass, which is highly resistant to corrosion and an excellent choice to withstand high temperatures Right side mount T and S Brass EW-7612 Specifications: Overall Height: 7"

T and S Brass EW-7612 Collection

10. SAS Safety 5145 Impact-Resistant Deluxe Clear Faceshield w/ Adj Headpiece

Features and Benefits: Extra large spark guard Curved injection-molded lens Polycarbonate lens Ratcheting adjustable headpiece 8" x 15-1/2" x 0.060" lens Features a new curved design. Face shield meets ANSI Z87.1, With a anti-scratch lens it accommodates respirator. One size fits all. Complies with OSHA standards.

Extra large spark guard Curved injection-molded lens Polycarbonate lens Ratcheting adjustable headpiece 8" x 15-1/2" x 0.060" lens