The Best Heating & Air Conditioning on Advance Auto Parts Shop 2024

1. Dayco Curved Radiator Hose Fits select: 1998-2002 CHEVROLET CAMARO, 1998-2002 PONTIAC FIREBIRD

Dayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose Meets SAE J20R4, Class D-1 requirements for improved service hose Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges End 1 Inside Diameter : 1 1/4 in End 2 Inside Diameter : 1 1/2 in Material : EPDM Fits Select: 1998-2002 CHEVROLET CAMARO 8 Cyl 5.7 L 1998-2002 PONTIAC FIREBIRD 8 Cyl 5.7 L and more - add your vehicle to our fit widget to check

2. Dayco Molded Heater Hose

This Dayco Molded Heater Hose branched assembly is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Made with a tough EPDM rubber compound this hose is made to resist the detrimental effects of heat, ozone and impacts from road debris Highly resistant to electro-chemical degradation this hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications Made with a protective sleeve that protects contact areas against abrasion and heat The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture End 1 Inside Diameter : 3/4 In End 2 Inside Diameter : 3/4 In Material : EPDM

3. Dayco Curved Radiator Hose

Dayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose Meets SAE J20R4, Class D-1 requirements for improved service hose Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges End 1 Inside Diameter : 1 19/32 In End 2 Inside Diameter : 1 19/32 In Material : EPDM

4. American Grease Stick (AGS) 1/4" Pipe Thread Grease Fittings - Male Straight - Length 31/32", 1 each, sold by each

626000 GREASE FITTIN

Multi-use

5. Carquest Premium New Compressor with Clutch

CARQUEST New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. CARQUEST New Compressors are designed to pump the air conditioning refrigerant through the air conditioning system to provide exceptional climate control for the passenger compartment.

New, with Clutch, with 10S17C Compressor Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions. New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit. The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless. All new compressors must pass a helium leak test and pump up function test prior to packaging. O-Rings and gaskets necessary for installation are included.

6. Dayco Molded Heater Hose

Dayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications Highly resistant to electro-chemical degradation and premature stress cracking of the tube The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture End 1 Inside Diameter : 5/8 in End 2 Inside Diameter : 3/4 in Material : EPDM

7. Dayco Curved Radiator Hose

Dayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose Meets SAE J20R4, Class D-1 requirements for improved service hose Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges End 1 Inside Diameter : 1 1/2 in End 2 Inside Diameter : 1 1/2 in Material : EPDM

8. Dayco Curved Radiator Hose

Dayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose Meets SAE J20R4, Class D-1 requirements for improved service hose Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges End 1 Inside Diameter : 3/4 in End 2 Inside Diameter : 1 in Material : EPDM

9. Dayco Curved Radiator Hose Fits select: 2003-2005 HONDA CIVIC

Dayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges. This hose is also made with a protective sleeve that protects contact areas against abrasion and heat.

Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose Made with a protective sleeve that protects contact areas against abrasion and heat Highly resistant to electro-chemical degradation this hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications End 1 Inside Diameter : 1 1/16 In End 2 Inside Diameter : 1 1/16 In Material : EPDM Fits Select: 2003-2005 HONDA CIVIC and more - add your vehicle to our fit widget to check

10. Dayco Curved Radiator Hose

Dayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose Meets SAE J20R4, Class D-1 requirements for improved service hose Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges End 1 Inside Diameter : 1 1/2 in End 2 Inside Diameter : 1 1/2 in Material : EPDM