The Best Mouldings 2024

1. M-D Building Products 48913 72 In. Unfinished Hardwood Trans Tile/Vinyl w/ Anchors & Screws

Tile to Vinyl Hardwood Transition connects a higher level tile floor to a lower lying vinyl floor surface without exposed fasteners. The SnapTrack is placed in the seam between tile and laminate floor during floor installation. The rounded Hardwood Transition snaps into place and covers the laminate and tile floor seam while creating a smooth transition between floors. Attach SnapTrack to floor with construction adhesive or included anchors and metal screws.

Natural wood withstands high foot traffic areas in the home For use in doorways, room entryways or other locations where tile and vinyl floors meet 1-5/8 W x 7/8 D x 72 in. L Unfinished Snap Track firmly holds Hardwood Transition in place without visible screws Can be cut to desired length with a hand saw Stainable For concrete floors, drill 3/16 in. pilot holes and insert anchors SnapTrack, (6) M5 Anchors & (6) #6 3/4 in. Screws Included

2. Waddell OCTB-52 6.75 L x 6.5 W x 6.5 D in. Outside Crown Trim Pine Block Moulding

No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.nullnull MOULDING & TRIM CROWN CORNER BLOCKS OUTSIDE THE MOULDING CONNECTION Fits Moulding Up to 5-1/4" LxWxT In=6-3/4 x 6-1/2 x 6-1/2

No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.nullnullCROWN CORNER BLOCKS OUTSIDE THE MOULDING CONNECTION Fits Moulding Up to 5-1/4" LxWxT In=6-3/4 x 6-1/2 x 6-1/2

3. Wrap Brothers SM750 Wood Molding Strip, 5/8 in W X 3 ft L X 1/4 in T per 250 EA

Wrap Brothers Wood Molding Strip, Wrap Brothers, 5/8 in Width, 3 ft Length, 1/4 in Thickness, Pine, Resists: Water, For Mounting Plastic Window Materialwith Tacks or Staples

Wrap Brothers Wood Molding Strip, Wrap Brothers, 5/8 in Width, 3 ft Length, 1/4 in Thickness, Pine, Resists: Water, For Mounting Plastic Window Materialwith Tacks or Staples

4. M-D Building Products 43813 1-1/2 In. X 72 In. Pewter Aluminum Multi Floor Transition

Aluminum Multi Floor Transition easily covers a seam or gap between two flooring surfaces. A unique rounded design transitions flooring surfaces of equal or unequal heights. Multi Floor Transitions can be secured after floors have been installed to create a seamless look. Multi Floor Transitions prevent carpet edges from fraying, vinyl floor seams from curling and creates a smooth transition between different flooring surfaces. Multiflora Transitions are easily secured to wood and concrete floors with provided nylon fasteners.

Durable aluminum withstands high foot traffic areas in the home For use in doorways, room entry ways or other locations where two flooring surfaces meet 1-1/2 in. W x 1/2 in. D x 72 in. L Pewter finish Included 1-3/16 in. nylon fasteners adjust to varying floor heights for easy DIY installation Can be cut to desired length with hack saw. Anodized finish won't corrode or fade Recommended for gaps narrower than the transition strip

5. M-D Building Products 70011 1/16 in. x 96 in. Satin Clear Moulding Cap w/Nails

M-D aluminum Decorative Moulding Caps can serve a variety of purposes in both residential and commercial settings. Interior design accents, transition strips, edge protection, exterior trims, and unlimited possibilities for DIY project. These moldings are versatile and functional solutions for adding aesthetic appeal, protection, and structural integrity to various interior and exterior spaces. Install with included nails to protect material.

Durable anodized aluminum Finishes & protects 1/16 in. thick material 1/16 in. x 96 in. Satin Clear Smooth sleek finish Fasteners included Subtle minimalist finish to blend with surroundings Can be used as an interior design accent, transition strip, edge protection, exterior trim or to frame mirrors, create custom wall art or build decorative shelves

6. M-D Building Products 70359 3/4 in. x 96 in. Satin Clear Moulding Outside Corner w/Screws

M-D aluminum Decorative Moulding Outside Corners can serve a variety of purposes in both residential and commercial settings. Interior design accents, transition strips, edge protection, exterior trims, and unlimited possibilities for DIY project. These moldings are versatile and functional solutions for adding aesthetic appeal, protection, and structural integrity to various interior and exterior spaces. Install with included screws to protect 90-degree outside corners.

Durable anodized aluminum Finishes & protects outside corners 3/4 in x 3/4 in. x 96 in. Satin Clear Smooth sleek finish Fasteners included Subtle minimalist finish to blend with surroundings Can be used as an interior design accent, transition strip, edge protection, exterior trim or to frame mirrors, create custom wall art or build decorative shelves

7. M-D Building Products 85290 1 In. X 36 In. Unfinished Hardwood Carpet Trim w/ Screws

Hardwood Carpet Trim easily covers a seam or gap between two flooring surfaces of unequal height. Carpet Trim prevents carpet edges from fraying, vinyl floor seams from curling and creates a smooth transition between different flooring surfaces. Secure to wood floors with provided Screws. For concrete floors, install with Screws & Wood Pegs (Wood Pegs sold separately).

Natural wood withstands high foot traffic areas in the home For use in doorways, room entryways or other locations where two unequal height flooring surfaces meet 1 in. W x 36 in. L Unfinished Included 1-1/2 in. 10 gauge screws fit firmly in pre-drilled holes for easy installation Can be cut to desired length with hand saw Unfinished hardwood can be stained to match flooring Position shorter leg on carpet during installation (3) 1-1/2 in. 10 gauge Screws included Recommended for gaps narrower than the transition strip

8. M-D 85555 Floor Edge Reducer, 36 in L, Oak

Reducers cover seams and joints in linoleum, floor tile and other similar floor coverings. Includes screws to secure to floor. 1/2"H.

Decorative sloping oak transition piece between floor surfaces of different heights. Available in unfinished and light finished, clear grade oak. Unfinished oak can be stained or painted. Pre-drilled, countersunk holes.Highlights:W x L In.=1-3/4 x 36Finish=LightW858 reducers cover seams and joints in linoleumFloor tile and other similar floor coverings. Includes screws to secure to secure to floor

9. Focal Point 21620 Outside Corner 4.12 in.

Corner blocks eliminate the need to miter corners. For use with all 4-1/8" Focal Point products in the RSCs. Trim nails and 1-5/8" drywall screws are required for installation of moulding. . . Features Size: 4-1/8" No need to find studs No nail holes to patch on moulding Corner blocks eliminate the need to miter corners Polyurethane For use with all 4-1/8" Focal Point products in the RSCs Trim nails and 1-5/8" drywall screws are required for installation of mouldingSpecifications Dimension: 4.5" H x 4.5" W x 3.5" L Weight: 0.2 lbs - SKU: ACHR14575

Outside Corner 4-1/8"

10. Edge Molding Inside Corner

Constructed with 100% Solid Teak. Inside Radius: 1-3/4". Outside Radius: 2-1/4". 1-3/4"x 2-1/4"

Edge Molding Inside Corner